Whether in the wc or in a swimming pool, it from time to time occurs that the Motorola One Zoom is slipped in the water. Nonetheless, it is not because a phone has fallen in the water that it’s obviously dead. Indeed, it is feasible to redo an Motorola One Zoom that has fallen in the water. To achieve this, it is necessary to respect certain actions. People generally have bad reflexes and this is what can damage the Motorola One Zoom. We will first see the methods to be taken after the Motorola One Zoom has fallen into the water. We will see in the secondary place the classical errors that most people make.
Methods to follow in cases where your Motorola One Zoom fell into the water
In the event that you wish to restore your Motorola One Zoom in operating order, we recommend that you follow the steps below.
Don’t attempt to turn the Motorola One Zoom back on after getting out the water
The very first thing to perform when the Motorola One Zoom has fallen into the water is to turn off the phone. Indeed, in cases where it didn’t switch off, turn it off without doing any other tricks. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the Motorola One Zoom is started and wet, you could produce a short circuit and consequently toast the phone.
Remove detachable components
When the Motorola One Zoom is out of the water and turned off, it will have to be disassembled to the highest possible. This means that it’ll be necessary to take out the shell, the SIM card, the SD card and the electric battery if possible. When carried out, put all of these items to dry and continue to the next step.
Aspire the water that is in your Motorola One Zoom
Utilizing a straw, you will need to suck up the water that is contained in your Motorola One Zoom. For doing it, you simply have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Motorola One Zoom, you will be able to start drying it.
Dry the Motorola One Zoom
The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using procédures that cause the phone to heat up or damage the phone. When it is done, we recommend you to leave the Motorola One Zoom in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Motorola One Zoom.
Reassemble the components and turn on the Motorola One Zoom
When you have completed the prior steps, your Motorola One Zoom should be dry. So now you can make an attempt to turn on the Motorola One Zoom. If this does not do the job, we recommend you to hang on some days or to bring the Motorola One Zoom to a repairman.
What should not be done in cases where the Motorola One Zoom has fallen into the water
There are a number of stuff not to perform when your Motorola One Zoom has fallen into the water. The first is to make an attempt to turn the phone back on just after. This can kill the Motorola One Zoom. Following, it is highly suggested not to use a heat source to dry the Motorola One Zoom. Without a doubt, methods which include oven or hair dryer heat the components and may damage them. Finally, to get the water out of the phone, do not shake it. In fact, it could likewise ruin the Motorola One Zoom.
