At times, the Wiko Power U30 displays the Authentication Problem message when you try to connect to a Wi-Fi network. This sort of error message can potentially come from many places. So, so that you may connect properly to the Wifi network with your Wiko Power U30, we decided to produce this tuto. So we will observe together what to do and where to look to solve this problem of Wifi authentication. We will see at first of all what you have to do on the Wiko Power U30. At last, we will see what it can be required to do and check on your Wifi box.
What to do when the Wiko Power U30 has an authentication problem on the Wifi network
Forget the Wifi network on your Wiko Power U30
In cases where the Wi-Fi network to which you want to connect has been changed since your last authentication, your Wiko Power U30 may display the text: Authentication or authentication error . In cases where the problem comes from there, the solution is fairly simple. Just forget about the Wifi network in your Wiko Power U30. To get this done, go to the settings of the Wifi network and keep pressed on the network in question. You will then have the option to choose the option: Forget this network . Once it is completed, you may try again to connect to the Wifi network. In the event that the problem is not resolved, go to the next section.
Press the box button
Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it may possibly happen to have a problem of authentication Wifi on the Wiko Power U30 because the box is not in Synchronization mode . If you need to activate the synchronization mode of your box, it can be incredibly basic. You should find a synchronization button to press. When this is completed, a light will normally start blinking. You can then try to reconnect to the Wifi network with your Wiko Power U30. In cases where it still does not function, go to the next trick.
Retype Password
At times the authentication problem comes from the method you type the Wifi network password. Certainly, it can be sometimes subtle to type a password Wifi on its Wiko Power U30. We consequently advise you to try all the following possibilities:
- Type the code without spaces or hyphens
- Type the password in uppercase
- Type the password in lowercase
Restart your box
As in lots of pc problems, the solution is oftentimes incredibly simple. Certainly, 80% of the pc problems are solved by restarting the machine. We therefore recommend you to restart your box and your Wiko Power U30. After that try to reconnect with your Wiko Power U30.
Check box settings
In cases where none of the previous solutions did function, the problem might be found to be on the box of your provider. It will consequently be required to go in the parameters of the box and to check if perhaps the system of key is in WPA / WPA2 . In cases where this is not the circumstance, choose this option. After that try to connect your Wiko Power U30 again to Wifi. In cases where the authentication problem continues, we advise that you contact your service provider or a telephone retail store.
