How to fix a water damaged on Zopo

Whether in the toilet or in a swimming pool, it from time to time occurs that the Zopo is slipped in the water. On the other hand, it is not simply because a cellphone has fallen in the water that it’s unavoidably dead. Certainly, it is possible to redo an Zopo that has fallen in the water. To get this done, it is important to respect certain steps. People frequently have bad reflexes and this is what can degrade the Zopo. We will first see the steps to be taken after the Zopo has fallen into the water. We will see in the secondary place the classical errors that a good number of people make.water-damaged-Zopo

Methods to follow in the event that your Zopo fell into the water

If you wish to recover your Zopo in operating order, we recommend that you follow the steps below.

Don’t try to turn the Zopo back on after getting out the water

One thing to do when the Zopo has fallen into the water is to shut off the cellphone. Certainly, in the event that it did not switch off, turn it off without doing any other tricks. If it is already off, do not try to turn it back on for the moment. If the Zopo is switched on and wet, you may create a short circuit and as a result toast the cellphone.

Remove detachable components

Once the Zopo is out of the water and turned off, it will have to be disassembled to the maximum. Meaning that it will probably be important to take away the shell, the SIM card, the SD card and the battery if possible. Once performed, put all of these things to dry and continue to the following step.

Aspire the water that is in your Zopo

By using a straw, you will have to suck up the water that is contained in your Zopo. For this, you only have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Zopo, you will have the capacity to start drying it.

Dry the Zopo

The fourth step is to dry the cellphone. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using techniques that cause the cellphone to heat up or damage the cellphone. Once it is performed, we suggest you to leave the Zopo in rice for 24 or 48 hours. The rice will as a result absorb the wetness that remains in the Zopo.

Reassemble the components and turn on the Zopo

When you have completed the previous steps, your Zopo should be dry. So now you can try to turn on the Zopo. If this does not work, we suggest you to wait some days or to bring the Zopo to a repairman.

What should not be done in the event that the Zopo has fallen into the water

You will find a number of points not to do when ever your Zopo has fallen into the water. The first is to try to turn the cellphone back on just after. This can demolish the Zopo. Following, it is highly recommended not to use a heat source to dry the Zopo. In fact, techniques which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the cellphone, do not shake it. In fact, it could also ruin the Zopo.