Whether in the wc or in a pool, it sometimes occurs that the Zopo Speed 7 is dropped into the water. On the other hand, it isn’t because a telephone has fallen into the water that it is obviously dead. Certainly, it is possible to redo an Zopo Speed 7 that has fallen into the water. To accomplish this, it is needed to respect certain steps. People frequently have bad reflexes and this is what can deteriorate the Zopo Speed 7. We will first of all discover the methods to be taken after the Zopo Speed 7 has fallen into the water. We will discover in the 2nd place the classical errors that many people make.
Steps to follow in cases where your Zopo Speed 7 fell into the water
In the event that you need to restore your Zopo Speed 7 in working order, we advise that you follow the steps listed below.
Don’t try to turn the Zopo Speed 7 back on after getting out the water
The very first thing to accomplish when the Zopo Speed 7 has fallen into the water is to switch off the telephone. Certainly, in cases where it didn’t switch off, turn it off without doing any other manipulation. If it is already off, do not try to turn it back on for the moment. If the Zopo Speed 7 is switched on and wet, you might make a short circuit and consequently toast the telephone.
Remove detachable components
Once the Zopo Speed 7 is out of the water and turned off, it will have to be disassembled to the highest possible. This means that it will be needed to remove the shell, the SIM card, the SD card and the electric battery if possible. Once performed, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Zopo Speed 7
Using a straw, you will have to suck up the water that is contained in your Zopo Speed 7. For doing it, you merely have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Zopo Speed 7, you will be able to start drying it.
Dry the Zopo Speed 7
The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator a number of hours. Avoid using solutions that cause the telephone to heat up or damage the telephone. Once it is done, we advise you to leave the Zopo Speed 7 in rice for 24 or 48 hours. The rice will consequently absorb the moisture that stays in the Zopo Speed 7.
Reassemble the components and turn on the Zopo Speed 7
When you have completed the prior steps, your Zopo Speed 7 should be dry. So now you can make an attempt to turn on the Zopo Speed 7. If this does not do the job, we advise you to wait some days or to bring the Zopo Speed 7 to a repairshop.
What should not be done in cases where the Zopo Speed 7 has fallen into the water
You will find a number of things not to accomplish when ever your Zopo Speed 7 has fallen into the water. The first of all is to make an attempt to turn the telephone back on just after. This can destroy the Zopo Speed 7. Following, it is strongly suggested not to use a heat source to dry the Zopo Speed 7. In fact, techniques which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the telephone, do not shake it. Indeed, it could as well damage the Zopo Speed 7.
