Whether in the wc or in a swimming pool, it occasionally happens that the Yezz Andy is dropped in the water. However, it isn’t simply because a mobile phone has fallen in the water that it’s inevitably dead. Certainly, it is feasible to redo an Yezz Andy that has fallen in the water. To accomplish this, it is required to respect particular actions. People typically have bad reflexes and this is what can deteriorate the Yezz Andy. We will first of all discover the methods to be taken after the Yezz Andy has fallen into the water. We will discover in the second place the common mistakes that a good number of people make.
Methods to follow in cases where your Yezz Andy fell into the water
In the event that you want to recover your Yezz Andy in working order, we suggest that you follow the steps below.
Do not attempt to turn the Yezz Andy back on after getting out the water
The very first thing to accomplish when the Yezz Andy has fallen into the water is to turn off the mobile phone. Certainly, in cases where it didn’t switch off, turn it off without doing any other manipulation. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Yezz Andy is turned on and wet, you can make a short circuit and as a result toast the mobile phone.
Remove detachable components
Once the Yezz Andy is out of the water and switched off, it will have to be disassembled to the highest possible. Meaning that it’ll be required to take away the shell, the SIM card, the SD card and the electric battery if possible. Once completed, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Yezz Andy
Employing a straw, you will need to suck up the water that is contained in your Yezz Andy. For this, you simply have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Yezz Andy, you will have the capacity to start drying it.
Dry the Yezz Andy
The fourth step is to dry the mobile phone. For this, we suggest you to put it in front of a ventilator a number of hours. Prevent using solutions that cause the mobile phone to heat up or damage the mobile phone. Once it is performed, we suggest you to leave the Yezz Andy in rice for 24 or 48 hours. The rice will as a result absorb the moisture that stays in the Yezz Andy.
Reassemble the components and turn on the Yezz Andy
When you have completed the prior steps, your Yezz Andy should be dry. So now you can try to turn on the Yezz Andy. If perhaps this doesn’t perform, we suggest you to wait a couple of days or to bring the Yezz Andy to a repairshop.
What should not be done in cases where the Yezz Andy has fallen into the water
There are a number of things not to accomplish when ever your Yezz Andy has fallen into the water. The first of all is to try to turn the mobile phone back on just after. This can kill the Yezz Andy. Next, it is strongly advised not to use a heat source to dry the Yezz Andy. Indeed, techniques which include oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the mobile phone, do not shake it. Certainly, it could additionally ruin the Yezz Andy.
