Whether in the toilet or in a swimming pool, it from time to time occurs that the Motorola edge 30 ultra is slipped into the water. Nevertheless, it is not simply because a mobile has fallen into the water that it’s undoubtedly dead. In truth, it is possible to redo an Motorola edge 30 ultra that has fallen into the water. To accomplish this, it is essential to respect particular steps. People typically have bad reflexes and this is what can deteriorate the Motorola edge 30 ultra. We will 1st discover the steps to be taken after the Motorola edge 30 ultra has fallen into the water. We will discover in the second place the common mistakes that a good number of people make.
Steps to follow in cases where your Motorola edge 30 ultra fell into the water
In the event that you need to recover your Motorola edge 30 ultra in working order, we advise that you follow the steps below.
Don’t try to turn the Motorola edge 30 ultra back on after getting out the water
One thing to perform when the Motorola edge 30 ultra has fallen into the water is to shut off the mobile. In truth, in cases where it didn’t switch off, turn it off without doing any other tricks. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Motorola edge 30 ultra is turned on and wet, you can generate a short circuit and therefore toast the mobile.
Remove detachable components
When the Motorola edge 30 ultra is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it’ll be essential to take out the shell, the SIM card, the SD card and the battery if possible. When finished, put all of these things to dry and proceed to the following step.
Aspire the water that is in your Motorola edge 30 ultra
Utilizing a straw, you must suck up the water that is contained in your Motorola edge 30 ultra. For this, you simply need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Motorola edge 30 ultra, you will have the ability to start drying it.
Dry the Motorola edge 30 ultra
The fourth step is to dry the mobile. For this, we advise you to put it in front of a ventilator a number of hours. Prevent using méthodes that cause the mobile to heat up or damage the mobile. When it is completed, we advise you to leave the Motorola edge 30 ultra in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the Motorola edge 30 ultra.
Reassemble the components and turn on the Motorola edge 30 ultra
When you have completed the previous steps, your Motorola edge 30 ultra should be dry. So now you can make an attempt to turn on the Motorola edge 30 ultra. If perhaps this does not perform, we advise you to hold out some days or to bring the Motorola edge 30 ultra to a repairman.
What should not be done in cases where the Motorola edge 30 ultra has fallen into the water
You will find a number of points not to perform when ever your Motorola edge 30 ultra has fallen into the water. The 1st is to make an attempt to turn the mobile back on just after. This can demolish the Motorola edge 30 ultra. Next, it is highly recommended not to use a heat source to dry the Motorola edge 30 ultra. Indeed, methods such as oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the mobile, do not shake it. In fact, it could likewise damage the Motorola edge 30 ultra.
