How to fix a water damaged on Google Pixel 6a

Whether in the wc or in a swimming pool, it sometimes occurs that the Google Pixel 6a is slipped into the water. Nevertheless, it is not because a mobile phone has fallen into the water that it is obviously dead. In truth, it is possible to redo an Google Pixel 6a that has fallen into the water. To achieve this, it is important to respect particular steps. People typically have bad reflexes and this is what can damage the Google Pixel 6a. We will first see the techniques to be taken after the Google Pixel 6a has fallen into the water. We will see in the secondary place the common mistakes that a good number of people make.water-damaged-google-pixel-6a

Methods to follow in cases where your Google Pixel 6a fell into the water

If perhaps you desire to restore your Google Pixel 6a in operating order, we suggest that you follow the steps below.

Don’t try to turn the Google Pixel 6a back on after getting out the water

The very first thing to perform when the Google Pixel 6a has fallen into the water is to turn off the mobile phone. In truth, in cases where it didn’t switch off, turn it off without doing any other tricks. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Google Pixel 6a is started and wet, you may generate a short circuit and as a result toast the mobile phone.

Remove detachable components

Once the Google Pixel 6a is out of the water and switched off, it will have to be disassembled to the maximum. This means that it will be important to take away the shell, the SIM card, the SD card and the electric battery if possible. Once finished, put all of these items to dry and continue to the next step.

Aspire the water that is in your Google Pixel 6a

By using a straw, you will need to suck up the water that is contained in your Google Pixel 6a. For doing it, you just have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Google Pixel 6a, you will have the ability to start drying it.

Dry the Google Pixel 6a

The fourth step is to dry the mobile phone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using méthodes that cause the mobile phone to heat up or damage the mobile phone. Once it is performed, we suggest you to leave the Google Pixel 6a in rice for 24 or 48 hours. The rice will as a result absorb the moisture that stays in the Google Pixel 6a.

Reassemble the components and turn on the Google Pixel 6a

When you have completed the previous steps, your Google Pixel 6a should be dry. So now you can try to turn on the Google Pixel 6a. In the event that this doesn’t function, we suggest you to hold out a few days or to bring the Google Pixel 6a to a repairshop.

What should not be done in cases where the Google Pixel 6a has fallen into the water

There are several stuff not to perform when ever your Google Pixel 6a has fallen into the water. The first is to try to turn the mobile phone back on just after. This can kill the Google Pixel 6a. Next, it is strongly advised not to use a heat source to dry the Google Pixel 6a. In fact, techniques such as oven or hair dryer heat the components and may damage them. At last, to get the water out of the mobile phone, do not shake it. In fact, it could additionally damage the Google Pixel 6a.