Whether in the toilet or in a pool, it occasionally happens that the Meizu 16T is slipped in the water. Nonetheless, it’s not simply because a mobile has fallen in the water that it’s obviously dead. In truth, it is feasible to redo an Meizu 16T that has fallen in the water. To do this, it is needed to respect certain steps. People often have bad reflexes and this is what can damage the Meizu 16T. We will first of all discover the steps to be taken after the Meizu 16T has fallen into the water. We will discover in the secondary place the common mistakes that a large number of people make.
Methods to follow in cases where your Meizu 16T fell into the water
Whenever you need to restore your Meizu 16T in operating order, we highly recommend that you follow the steps listed below.
Don’t attempt to turn the Meizu 16T back on after getting out the water
The very first thing to accomplish when the Meizu 16T has fallen into the water is to switch off the mobile. In truth, in cases where it did not turn off, turn it off without doing any other manipulation. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Meizu 16T is started and wet, you could produce a short circuit and therefore toast the mobile.
Remove detachable components
Once the Meizu 16T is out of the water and switched off, it will have to be disassembled to the highest possible. This implies that it will be needed to remove the shell, the SIM card, the SD card and the electric battery if possible. Once done, put all of these things to dry and continue to the next step.
Aspire the water that is in your Meizu 16T
Employing a straw, you have got to suck up the water that is contained in your Meizu 16T. For doing it, you only have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Meizu 16T, you will have the capacity to start drying it.
Dry the Meizu 16T
The fourth step is to dry the mobile. For this, we recommend you to put it in front of a ventilator several hours. Avoid using methods that cause the mobile to heat up or damage the mobile. Once it is done, we recommend you to leave the Meizu 16T in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the Meizu 16T.
Reassemble the components and turn on the Meizu 16T
When you have completed the prior steps, your Meizu 16T should be dry. So now you can try to turn on the Meizu 16T. In the event that this doesn’t work, we recommend you to hold out some days or to bring the Meizu 16T to a repairshop.
What should not be done in cases where the Meizu 16T has fallen into the water
There are several points not to accomplish when your Meizu 16T has fallen into the water. The first of all is to try to turn the mobile back on just after. This can demolish the Meizu 16T. Following, it is strongly advised not to use a heat source to dry the Meizu 16T. Without a doubt, methods such as oven or hair dryer heat the components and may damage them. At last, to get the water out of the mobile, do not shake it. Certainly, it could also ruin the Meizu 16T.
