Whether in the toilet or in a swimming pool, it occasionally happens that the Motorola E6 Play is dropped into the water. However, it isn’t because a telephone has fallen into the water that it is undoubtedly dead. In truth, it is possible to redo an Motorola E6 Play that has fallen into the water. To accomplish this, it is essential to respect particular actions. People generally have bad reflexes and this is what can degrade the Motorola E6 Play. We will first of all see the methods to be taken after the Motorola E6 Play has fallen into the water. We will see in the second place the common mistakes that a large number of people make.
Methods to follow in the event that your Motorola E6 Play fell into the water
If you need to restore your Motorola E6 Play in working order, we advise that you follow the steps below.
Do not attempt to turn the Motorola E6 Play back on after getting out the water
The first thing to do when the Motorola E6 Play has fallen into the water is to shut off the telephone. In truth, in the event that it did not turn off, turn it off without doing any other manipulation. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Motorola E6 Play is started and wet, you might make a short circuit and as a result toast the telephone.
Remove detachable components
Once the Motorola E6 Play is out of the water and turned off, it will have to be disassembled to the maximum. This implies that it’ll be essential to take away the shell, the SIM card, the SD card and the battery if possible. Once completed, put all of these things to dry and continue to the following step.
Aspire the water that is in your Motorola E6 Play
Employing a straw, you have got to suck up the water that is contained in your Motorola E6 Play. For this, you just need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Motorola E6 Play, you will be ready to start drying it.
Dry the Motorola E6 Play
The fourth step is to dry the telephone. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using solutions that cause the telephone to heat up or damage the telephone. Once it is completed, we suggest you to leave the Motorola E6 Play in rice for 24 or 48 hours. The rice will as a result absorb the wetness that stays in the Motorola E6 Play.
Reassemble the components and turn on the Motorola E6 Play
When you have completed the previous steps, your Motorola E6 Play should be dry. So now you can make an attempt to turn on the Motorola E6 Play. In the event that this doesn’t do the job, we suggest you to wait some days or to bring the Motorola E6 Play to a repairman.
What should not be done in the event that the Motorola E6 Play has fallen into the water
You will find a number of things not to do when your Motorola E6 Play has fallen into the water. The first of all is to make an attempt to turn the telephone back on just after. This can kill the Motorola E6 Play. Following, it is strongly advised not to use a heat source to dry the Motorola E6 Play. Indeed, techniques such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the telephone, do not shake it. Certainly, it could likewise damage the Motorola E6 Play.
