Whether in the wc or in a pool, it from time to time happens that the LG X2 is slipped into the water. Even so, it isn’t simply because a mobile has fallen into the water that it’s inevitably dead. In fact, it is possible to redo an LG X2 that has fallen into the water. To achieve this, it is required to respect particular actions. People typically have bad reflexes and this is what can damage the LG X2. We will first of all see the methods to be taken after the LG X2 has fallen into the water. We will see in the secondary place the common errors that most people make.
Methods to follow if perhaps your LG X2 fell into the water
If perhaps you need to restore your LG X2 in operating order, we recommend that you follow the steps below.
Do not attempt to turn the LG X2 back on after getting out the water
The very first thing to do when the LG X2 has fallen into the water is to turn off the mobile. In fact, if perhaps it did not switch off, turn it off without doing any other manipulation. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the LG X2 is turned on and wet, you can produce a short circuit and consequently toast the mobile.
Remove detachable components
Once the LG X2 is out of the water and turned off, it will have to be disassembled to the highest possible. This implies that it will probably be required to take away the shell, the SIM card, the SD card and the battery if possible. Once carried out, put all of these things to dry and continue to the following step.
Aspire the water that is in your LG X2
Utilizing a straw, you will have to suck up the water that is contained in your LG X2. For this, you only have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your LG X2, you will be able to start drying it.
Dry the LG X2
The fourth step is to dry the mobile. For this, we advise you to put it in front of a ventilator several hours. Avoid using méthodes that cause the mobile to heat up or damage the mobile. Once it is completed, we advise you to leave the LG X2 in rice for 24 or 48 hours. The rice will consequently absorb the moisture that stays in the LG X2.
Reassemble the components and turn on the LG X2
When you have completed the prior steps, your LG X2 should be dry. So now you can make an attempt to turn on the LG X2. In the event that this doesn’t perform, we advise you to hold out a few days or to bring the LG X2 to a repairshop.
What should not be done if perhaps the LG X2 has fallen into the water
There are several points not to do when ever your LG X2 has fallen into the water. The first of all is to make an attempt to turn the mobile back on just after. This can kill the LG X2. Next, it is highly advised not to use a heat source to dry the LG X2. Indeed, methods such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the mobile, do not shake it. Certainly, it could also ruin the LG X2.
