Whether in the toilet or in a swimming pool, it sometimes happens that the Lenovo K10 Plus is slipped into the water. However, it isn’t because a mobile has fallen into the water that it’s inevitably dead. Indeed, it is possible to redo an Lenovo K10 Plus that has fallen into the water. To do this, it is essential to respect particular actions. People generally have bad reflexes and this is what can damage the Lenovo K10 Plus. We will 1st discover the methods to be taken after the Lenovo K10 Plus has fallen into the water. We will discover in the second place the classical errors that a good number of people make.
Steps to follow if your Lenovo K10 Plus fell into the water
Whenever you want to restore your Lenovo K10 Plus in working order, we recommend that you follow the steps below.
Don’t try to turn the Lenovo K10 Plus back on after getting out the water
One thing to perform when the Lenovo K10 Plus has fallen into the water is to switch off the mobile. Indeed, if it did not switch off, turn it off without doing any other manipulation. If it is already off, do not try to turn it back on for the moment. If the Lenovo K10 Plus is turned on and wet, you can produce a short circuit and consequently toast the mobile.
Remove detachable components
When the Lenovo K10 Plus is out of the water and turned off, it will have to be disassembled to the highest possible. This means that it’ll be essential to take out the shell, the SIM card, the SD card and the electric battery if possible. When done, put all of these items to dry and continue to the following step.
Aspire the water that is in your Lenovo K10 Plus
By using a straw, you will need to suck up the water that is contained in your Lenovo K10 Plus. For doing it, you merely have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Lenovo K10 Plus, you will have the ability to start drying it.
Dry the Lenovo K10 Plus
The fourth step is to dry the mobile. For this, we suggest you to put it in front of a ventilator several hours. Prevent using solutions that cause the mobile to heat up or damage the mobile. When it is performed, we suggest you to leave the Lenovo K10 Plus in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Lenovo K10 Plus.
Reassemble the components and turn on the Lenovo K10 Plus
When you have completed the prior steps, your Lenovo K10 Plus should be dry. So now you can make an attempt to turn on the Lenovo K10 Plus. If perhaps this doesn’t function, we suggest you to hold out some days or to bring the Lenovo K10 Plus to a repairshop.
What should not be done if the Lenovo K10 Plus has fallen into the water
There are several things not to perform when your Lenovo K10 Plus has fallen into the water. The 1st is to make an attempt to turn the mobile back on just after. This can kill the Lenovo K10 Plus. Following, it is highly advised not to use a heat source to dry the Lenovo K10 Plus. In fact, methods such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the mobile, do not shake it. Indeed, it could also damage the Lenovo K10 Plus.
