Whether in the wc or in a pool, it occasionally happens that the Lava Z62 is dropped in the water. Nonetheless, it is not simply because a telephone has fallen in the water that it’s undoubtedly dead. In fact, it is possible to redo an Lava Z62 that has fallen in the water. To achieve this, it is needed to respect certain actions. People generally have bad reflexes and this is what can degrade the Lava Z62. We will 1st see the methods to be taken after the Lava Z62 has fallen into the water. We will see in the second place the common errors that the majority of people make.
Methods to follow if perhaps your Lava Z62 fell into the water
If perhaps you desire to restore your Lava Z62 in operating order, we highly recommend that you follow the steps below.
Don’t try to turn the Lava Z62 back on after getting out the water
The first thing to perform when the Lava Z62 has fallen into the water is to shut off the telephone. In fact, if perhaps it did not switch off, turn it off without doing any other tricks. If it is already off, do not try to turn it back on for the moment. If the Lava Z62 is started and wet, you could create a short circuit and consequently toast the telephone.
Remove detachable components
When the Lava Z62 is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it will probably be needed to take away the shell, the SIM card, the SD card and the battery if possible. When completed, put all of these things to dry and continue to the next step.
Aspire the water that is in your Lava Z62
Employing a straw, you will have to suck up the water that is contained in your Lava Z62. For doing it, you simply need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Lava Z62, you will be ready to start drying it.
Dry the Lava Z62
The fourth step is to dry the telephone. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using methods that cause the telephone to heat up or damage the telephone. When it is performed, we recommend you to leave the Lava Z62 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Lava Z62.
Reassemble the components and turn on the Lava Z62
When you have completed the prior steps, your Lava Z62 should be dry. So now you can make an attempt to turn on the Lava Z62. If this does not perform, we recommend you to hold out some days or to bring the Lava Z62 to a repairman.
What should not be done if perhaps the Lava Z62 has fallen into the water
There are a number of points not to perform when ever your Lava Z62 has fallen into the water. The 1st is to make an attempt to turn the telephone back on just after. This can destroy the Lava Z62. Following, it is strongly advised not to use a heat source to dry the Lava Z62. In fact, methods such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the telephone, do not shake it. Certainly, it could likewise damage the Lava Z62.
