Oftentimes, the Crosscall Trekker-X4 displays the Authentication Problem message when you try to connect to a Wi-Fi network. This kind of error message can possibly be caused by many places. So, so that you can actually connect properly to the Wifi network with your Crosscall Trekker-X4, we decided to produce this guide. So we will observe together what to do and where to look to solve this problem of Wifi authentication. We will see at first what you have to do on the Crosscall Trekker-X4. At last, we will see what it is important to do and check on your Wifi box.
How to proceed when the Crosscall Trekker-X4 has an authentication problem on the Wifi network
Forget the Wifi network on your Crosscall Trekker-X4
Whenever the Wi-Fi network to which you want to connect has been changed since your last authentication, your Crosscall Trekker-X4 may display the text message: Authentication or authentication error . Whenever the issue comes from there, the answer is very simple. Just forget about the Wifi network in your Crosscall Trekker-X4. To get this done, go to the settings of the Wifi network and keep pressed on the network in question. You will then have the option to select the option: Forget this network . Once it is carried out, you can actually try again to connect to the Wifi network. If the issue is not solved, go to the next step.
Press the box button
Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it may possibly happen to have a issue of authentication Wifi on the Crosscall Trekker-X4 because the box is not in Synchronization mode . If you wish to activate the synchronization mode of your box, it is extremely simple. You should find a synchronization button to press. When ever this is carried out, a light will normally start blinking. You’re able to then try to reconnect to the Wifi network with your Crosscall Trekker-X4. Whenever it still will not work, go to the next trick.
Retype Security password
Oftentimes the authentication problem originates from the technique you type the Wifi network password. In truth, it is sometimes subtle to type a password Wifi on its Crosscall Trekker-X4. We for that reason advise you to try all the following possibilities:
- Type the code without spaces or hyphens
- Type the password in uppercase
- Type the password in lowercase
Restart your box
As in a great many computer problems, the solution is from time to time extremely simple. In truth, 80% of the computer problems are solved by restarting the machine. We therefore recommend you to restart your box and your Crosscall Trekker-X4. After that try to reconnect with your Crosscall Trekker-X4.
Check box settings
Whenever none of the prior solutions did work, the problem could be found to be on the box of your provider. It will for that reason be important to go in the parameters of the box and to check if perhaps the system of key is in WPA / WPA2 . Whenever this is not the case, select this option. After that try to connect your Crosscall Trekker-X4 again to Wifi. Whenever the authentication issue continues, we recommend that you contact your service provider or a telephone retail store.
