Oftentimes, the Crosscall Core-M4 displays the Authentication Problem message when you try to connect to a Wi-Fi network. This kind of error message can possibly come from several places. So, so that you can actually connect properly to the Wifi network with your Crosscall Core-M4, we decided to produce this tuto. So we will see together what to do and where to look to resolve this issue of Wifi authentication. We will see at 1st what you need to do on the Crosscall Core-M4. Finally, we will see what it is required to do and check on your Wifi box.
How to proceed when the Crosscall Core-M4 has an authentication problem on the Wifi network
Forget the Wifi network on your Crosscall Core-M4
In cases where the Wi-Fi network to which you desire to connect has been changed since your last authentication, your Crosscall Core-M4 may display the text: Authentication or authentication error . In cases where the problem comes from there, the answer is fairly simple. Just forget about the Wifi network in your Crosscall Core-M4. To get this done, go to the settings of the Wifi network and keep pressed on the network in question. You will after that have the option to select the option: Forget this network . Once it’s completed, you can actually try again to connect to the Wifi network. In the event that the problem is not fixed, go to the next step.
Press the box button
Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it might happen to have a problem of authentication Wifi on the Crosscall Core-M4 because the box is not in Synchronization mode . If you would like to activate the synchronization mode of your box, it is incredibly simple. You should find a synchronization button to press. When ever this is completed, a light will normally start blinking. You may after that try to reconnect to the Wifi network with your Crosscall Core-M4. In cases where it still does not work, go to the next trick.
Retype Security password
Oftentimes the authentication problem originates from the technique you type the Wifi network password. In fact, it is sometimes subtle to type a password Wifi on its Crosscall Core-M4. We therefore advise you to try all the following possibilities:
- Type the code without spaces or hyphens
- Type the password in uppercase
- Type the password in lowercase
Restart your box
As in lots of computer problems, the solution is oftentimes incredibly simple. In fact, 80% of the computer problems are solved by restarting the machine. We therefore advise you to restart your box and your Crosscall Core-M4. After that try to reconnect with your Crosscall Core-M4.
Check box settings
In cases where none of the prior solutions did work, the problem could possibly be found to be on the box of your provider. It will therefore be required to go in the parameters of the box and to test in cases where the system of key is in WPA / WPA2 . In cases where this is not the case, select this option. After that try to connect your Crosscall Core-M4 again to Wifi. In cases where the authentication problem continues, we recommend that you contact your service provider or a telephone store.
