At times, the Wiko View lite displays the Authentication Problem message when you try to connect to a Wi-Fi network. This kind of error message can potentially sourced from a lot of places. So, so that you can actually connect properly to the Wifi network with your Wiko View lite, we decided to produce this tuto. So we will observe together what to do and where to look to solve this issue of Wifi authentication. We will see at first what you have to do on the Wiko View lite. Finally, we will see what it’s important to do and check on your Wifi box.
How to proceed when the Wiko View lite has an authentication problem on the Wifi network
Forget the Wifi network on your Wiko View lite
In the event that the Wi-Fi network to which you desire to connect has been changed since your last authentication, your Wiko View lite may display the message: Authentication or authentication error . In the event that the problem comes from there, the solution is quite simple. Simply forget about the Wifi network in your Wiko View lite. To do this, go to the settings of the Wifi network and keep pressed on the network in question. You will then have the option to choose the option: Forget this network . When it is carried out, you can actually try again to connect to the Wifi network. If perhaps the problem is not solved, go to the next section.
Press the box button
Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it may possibly happen to have a problem of authentication Wifi on the Wiko View lite because the box is not in Synchronization mode . If you need to activate the synchronization mode of your box, it’s extremely basic. You should find a synchronization button to press. When ever this is carried out, a light will normally start blinking. You can then try to reconnect to the Wifi network with your Wiko View lite. In the event that it still will not work, go to the next trick.
Retype Security password
At times the authentication problem originates from the solution you type the Wifi network password. Certainly, it’s sometimes subtle to type a password Wifi on its Wiko View lite. We therefore advise you to try all the following possibilities:
- Type the code without spaces or hyphens
- Type the password in uppercase
- Type the password in lowercase
Restart your box
As in a great many computer problems, the solution is occasionally extremely simple. Certainly, 80% of the computer problems are solved by restarting the machine. We therefore recommend you to restart your box and your Wiko View lite. Then try to reconnect with your Wiko View lite.
Check box settings
In the event that non-e of the prior answers did work, the problem might be found to be on the box of your provider. It will therefore be important to go in the parameters of the box and to test if the system of key is in WPA / WPA2 . In the event that this is not the circumstance, choose this option. Then try to connect your Wiko View lite again to Wifi. In the event that the authentication problem continues, we suggest that you contact your service provider or a telephone store.