Huawei MediaPad M3: Wifi Authentication Problem

Occasionally, the Huawei MediaPad M3 displays the Authentication Problem message when you try to connect to a Wi-Fi network. This kind of error message can potentially result from a lot of places. So, so that you may connect properly to the Wifi network with your Huawei MediaPad M3, we decided to produce this tuto. So we will find out together what to do and where to look to resolve this issue of Wifi authentication. We will see at 1st what you need to do on the Huawei MediaPad M3. Finally, we will see what it is actually required to do and check on your Wifi box.

How to proceed when the Huawei MediaPad M3 has an authentication problem on the Wifi network

Forget the Wifi network on your Huawei MediaPad M3

In cases where the Wi-Fi network to which you wish to connect has been changed since your last authentication, your Huawei MediaPad M3 may display the message: Authentication or authentication error . In cases where the trouble comes from there, the solution is straightforward. Just forget about the Wifi network in your Huawei MediaPad M3. To get this done, go to the settings of the Wifi network and keep pressed on the network in question. You will then have the option to choose the option: Forget this network . Once it is completed, you may try again to connect to the Wifi network. If the trouble is not resolved, go to the next section.

Press the box button

Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it may happen to have a trouble of authentication Wifi on the Huawei MediaPad M3 because the box is not in Synchronization mode . If you would like to activate the synchronization mode of your box, it is actually very simple. You should find a synchronization button to press. When this is completed, a light will most of the time start blinking. You can then try to reconnect to the Wifi network with your Huawei MediaPad M3. In cases where it still does not function, go to the next trick.

Retype Password

Occasionally the authentication problem originates from the way you type the Wifi network security password. Certainly, it is actually sometimes subtle to type a security password Wifi on its Huawei MediaPad M3. We consequently advise you to try all the following possibilities:

  • Type the code without spaces or hyphens
  • Type the security password in uppercase
  • Type the security password in lowercase

Restart your box

As in a great many pc problems, the solution is at times very simple. Certainly, 80% of the pc problems are solved by restarting the machine. We therefore recommend you to restart your box and your Huawei MediaPad M3. After that try to reconnect with your Huawei MediaPad M3.

Check box settings

In cases where non-e of the prior answers did function, the problem could be found to be on the box of your provider. It will consequently be required to go in the parameters of the box and to check if perhaps the system of key is in WPA / WPA2 . In cases where this is not the circumstance, choose this option. After that try to connect your Huawei MediaPad M3 again to Wifi. In cases where the authentication trouble continues, we recommend that you contact your service provider or a telephone retail store.