Sharing the net connection of Wiko View Go in wifi is an extremely practical feature on the Wiko View Go. In fact, putting the Wiko View Go in modem mode can help you to share the connection of the mobile phone with your entourage or with your other devices. So, if you don’t have a suitable Wifi access where you are, we will observe on this page the method to convert the Wiko View Go into a wifi hotspot. We will initially find out the method to turn on and configure connection sharing. We will find out in a secondary section what is the connection sharing and what it implies for the Wiko View Go.
How you can share the Wiko View Go connection
To turn your Wiko View Go into a Wi-Fi hotspot, it’s very basic. In fact, it is actually only necessary to execute two steps. The initially is to enable connection sharing and the secondary is to set up the network. All you need to do is stick to the two steps below.
Enable Internet Connection Sharing on Wiko View Go
To share your Wiko View Go internet connection, you will first need to enable connection sharing. To do this, go to the Wiko View Go Settings menu . When you’re there, you have to go to Wireless and Networks , and after that find the Internet Connection Sharing tab. You will then have three choices available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when the Wiko View Go is connected to a pc
- Share by using telephone bluetooth
When you have made your decision, you just have to check to activate the sharing of the Wiko View Go connection. When it is active, you should find out a small icon show up in the notifications bar.
Configure Wifi connection sharing on Wiko View Go
At this point that you have set your Wiko View Go in modem mode, you’ll need to set up the network so other devices may connect. Just those who have opted for Wi-Fi sharing are affected by the setup. To set up, click Via Wifi under Internet Connection Sharing. If you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you can change the password to connect to the Wiko View Go network. So, enter the security password of your choice and validate. Finally, you can also change the network name if you wish.
Connect to the Wiko View Go network
At this point that the network is configured, you can connect to it with other devices. To do this, you just simply need to bring your system and look for the Wiko View Go network among the available WIFI networks. When you have found it, you can log in using the password that you configured. And there you have a decent internet connection!
What is Connection Sharing on a Wiko View Go
To make it simple, sharing a connection means sharing the 3G or 4G connection of the Wiko View Go with other devices. So it’s ideal when you don’t have a WiFi connection but you have 3G or 4G network on your Wiko View Go. This permits you to have a good connection almost everywhere. Warning: Remember that Wiko View Go’s connection share uses mobile data. It indicates that the net usage you are using is deducted from your mobile plan. So, it will be possible to configure a limit on the consumption of mobile data. So, after a certain limit, the Wiko View Go hotspot wifi turn off.
