Setting up HotSpot or Tethering on Archos Core 55P

Sharing the web connection of Archos Core 55P in wifi is an incredibly convenient feature on the Archos Core 55P. Certainly, putting the Archos Core 55P in modem mode makes it possible to share the connection of the telephone with your entourage or with your other devices. So, in case you do not have a suitable Wifi access where you are, we will see in the following paragraphs the method to convert the Archos Core 55P into a wifi hotspot. We will initially discover the method to enable and configure connection sharing. We will discover in a secondary section what is the connection sharing and what it implies for the Archos Core 55P.Tethering-HotSpot-archos-core-55p

The method to share the Archos Core 55P connection

To turn your Archos Core 55P into a Wi-Fi hotspot, it’s incredibly simple. Certainly, it’s simply necessary to execute two steps. The first is to enable connection sharing and the secondary is to set up the network. All you should do is stick to the two steps below.

Enable Net Connection Sharing on Archos Core 55P

To share your Archos Core 55P internet connection, you’ll 1st have to enable connection sharing. To do this, go to the Archos Core 55P Settings menu . When you’re there, you need to go to Wireless and Networks , and after that find the Internet Connection Sharing tab. You will then have three options available to you:

  • Sharing the Wi-Fi connection: for connecting wireless devices
  • USB sharing: when the Archos Core 55P is connected to a personal pc
  • Share via mobile phone bluetooth

If you have made your choice, you just have to test to activate the sharing of the Archos Core 55P connection. When ever it is active, you should discover a small icon show up in the notifications bar.

Configure Wifi connection sharing on Archos Core 55P

Now that you have set your Archos Core 55P in modem mode, you’ll have to set up the network so other devices can connect. Only those who have opted for Wi-Fi sharing are affected by the setup. To set up, click Through Wifi under Internet Connection Sharing. When you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you can actually change the password to connect to the Archos Core 55P network. So, enter the password which you have chosen and confirm. At last, you can actually also modify the network name in case you wish.

Connect to the Archos Core 55P network

Now that the network is configured, you can actually connect to it with other devices. To do this, you just have to bring your device and look for the Archos Core 55P network among the available WIFI networks. If you have found it, you can log in using the password that you designed. And there you have a good internet connection!

What is Connection Sharing on a Archos Core 55P

To make it basic, sharing a connection means sharing the 3G or 4G connection of the Archos Core 55P with other devices. So it’s ideal when you do not have a WiFi connection but you have 3G or 4G network on your Archos Core 55P. This permits you to have a drinking connection almost everywhere. Warning: Note that Archos Core 55P’s connection share uses mobile data. It indicates that the web usage you are using is deducted from your portable plan. Thus, it’s possible to configure a limit on the consumption of mobile data. Thus, after a specific limit, the Archos Core 55P hotspot wifi turn off.