Whether in the toilet or in a swimming pool, it from time to time happens that the Zopo Color E is dropped in the water. On the other hand, it is not because a telephone has fallen in the water that it is unavoidably dead. In truth, it is feasible to redo an Zopo Color E that has fallen in the water. To get this done, it is needed to respect specific steps. People generally have bad reflexes and this is what can deteriorate the Zopo Color E. We will first of all discover the methods to be taken after the Zopo Color E has fallen into the water. We will discover in the secondary place the classical mistakes that a large number of people make.
Methods to follow if perhaps your Zopo Color E fell into the water
Whenever you desire to recover your Zopo Color E in operating order, we advise that you follow the steps listed below.
Do not attempt to turn the Zopo Color E back on after exiting the water
The first thing to perform when the Zopo Color E has fallen into the water is to switch off the telephone. In truth, if perhaps it did not turn off, turn it off without doing any other tricks. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the Zopo Color E is switched on and wet, you might create a short circuit and therefore toast the telephone.
Remove detachable components
When the Zopo Color E is out of the water and turned off, it will have to be disassembled to the maximum. Meaning that it’ll be needed to take out the shell, the SIM card, the SD card and the battery if possible. When done, put all of these things to dry and continue to the next step.
Aspire the water that is in your Zopo Color E
By using a straw, you will have to suck up the water that is contained in your Zopo Color E. For doing it, you just need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Zopo Color E, you will have the capacity to start drying it.
Dry the Zopo Color E
The fourth step is to dry the telephone. For this, we recommend you to put it in front of a ventilator several hours. Prevent using methods that cause the telephone to heat up or damage the telephone. When it is completed, we recommend you to leave the Zopo Color E in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the Zopo Color E.
Reassemble the components and turn on the Zopo Color E
When you have completed the prior steps, your Zopo Color E should be dry. So now you can make an attempt to turn on the Zopo Color E. If this does not work, we recommend you to hang on a few days or to bring the Zopo Color E to a repairman.
What should not be done if perhaps the Zopo Color E has fallen into the water
You will find several stuff not to perform when ever your Zopo Color E has fallen into the water. The first of all is to make an attempt to turn the telephone back on just after. This can kill the Zopo Color E. Following, it is strongly recommended not to use a heat source to dry the Zopo Color E. Certainly, methods which include oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the telephone, do not shake it. In fact, it could also damage the Zopo Color E.
