Whether in the toilet or in a swimming pool, it sometimes happens that the Xiaomi Redmi 2 is slipped in the water. Nevertheless, it’s not because a mobile phone has fallen in the water that it’s unavoidably dead. Indeed, it is feasible to redo an Xiaomi Redmi 2 that has fallen in the water. To achieve this, it is required to respect certain steps. People often have bad reflexes and this is what can degrade the Xiaomi Redmi 2. We will first of all discover the methods to be taken after the Xiaomi Redmi 2 has fallen into the water. We will discover in the secondary place the common mistakes that a large number of people make.
Methods to follow if your Xiaomi Redmi 2 fell into the water
In the event that you wish to restore your Xiaomi Redmi 2 in working order, we suggest that you follow the steps below.
Don’t attempt to turn the Xiaomi Redmi 2 back on after getting out the water
The first thing to perform when the Xiaomi Redmi 2 has fallen into the water is to turn off the mobile phone. Indeed, if it didn’t turn off, turn it off without doing any other manipulation. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the Xiaomi Redmi 2 is turned on and wet, you might make a short circuit and as a result toast the mobile phone.
Remove detachable components
Once the Xiaomi Redmi 2 is out of the water and switched off, it will have to be disassembled to the maximum. This means that it will probably be required to remove the shell, the SIM card, the SD card and the battery if possible. Once done, put all of these things to dry and continue to the next step.
Aspire the water that is in your Xiaomi Redmi 2
By using a straw, you must suck up the water that is contained in your Xiaomi Redmi 2. For doing it, you simply have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Xiaomi Redmi 2, you will have the capacity to start drying it.
Dry the Xiaomi Redmi 2
The fourth step is to dry the mobile phone. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using techniques that cause the mobile phone to heat up or damage the mobile phone. Once it is performed, we recommend you to leave the Xiaomi Redmi 2 in rice for 24 or 48 hours. The rice will as a result absorb the wetness that stays in the Xiaomi Redmi 2.
Reassemble the components and turn on the Xiaomi Redmi 2
When you have completed the previous steps, your Xiaomi Redmi 2 should be dry. So now you can try to turn on the Xiaomi Redmi 2. If perhaps this does not perform, we recommend you to hang on a few days or to bring the Xiaomi Redmi 2 to a repairman.
What should not be done if the Xiaomi Redmi 2 has fallen into the water
You will find a number of points not to perform when ever your Xiaomi Redmi 2 has fallen into the water. The first of all is to try to turn the mobile phone back on just after. This can demolish the Xiaomi Redmi 2. Following, it is highly advised not to use a heat source to dry the Xiaomi Redmi 2. Without a doubt, solutions such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the mobile phone, do not shake it. In fact, it could likewise ruin the Xiaomi Redmi 2.
