Whether in the wc or in a swimming pool, it sometimes happens that the Wiko Tommy 3 is slipped into the water. Nonetheless, it’s not because a phone has fallen into the water that it’s unavoidably dead. Indeed, it is feasible to redo an Wiko Tommy 3 that has fallen into the water. To do this, it is needed to respect certain steps. People often have bad reflexes and this is what can degrade the Wiko Tommy 3. We will first see the methods to be taken after the Wiko Tommy 3 has fallen into the water. We will see in the 2nd place the common mistakes that a good number of people make.
Methods to follow in cases where your Wiko Tommy 3 fell into the water
If perhaps you want to restore your Wiko Tommy 3 in working order, we highly recommend that you follow the steps listed below.
Don’t try to turn the Wiko Tommy 3 back on after exiting the water
The first thing to perform when the Wiko Tommy 3 has fallen into the water is to shut off the phone. Indeed, in cases where it didn’t turn off, turn it off without doing any other manipulation. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Wiko Tommy 3 is switched on and wet, you could produce a short circuit and as a result toast the phone.
Remove detachable components
When the Wiko Tommy 3 is out of the water and turned off, it will have to be disassembled to the highest possible. This implies that it’ll be needed to take away the shell, the SIM card, the SD card and the battery if possible. When completed, put all of these things to dry and proceed to the next step.
Aspire the water that is in your Wiko Tommy 3
By using a straw, you will have to suck up the water that is contained in your Wiko Tommy 3. For this, you simply need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Wiko Tommy 3, you will have the capacity to start drying it.
Dry the Wiko Tommy 3
The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using methods that cause the phone to heat up or damage the phone. When it is done, we recommend you to leave the Wiko Tommy 3 in rice for 24 or 48 hours. The rice will as a result absorb the wetness that remains in the Wiko Tommy 3.
Reassemble the components and turn on the Wiko Tommy 3
When you have completed the prior steps, your Wiko Tommy 3 should be dry. So now you can make an attempt to turn on the Wiko Tommy 3. In the event that this does not do the job, we recommend you to hold out some days or to bring the Wiko Tommy 3 to a repairshop.
What should not be done in cases where the Wiko Tommy 3 has fallen into the water
There are a number of stuff not to perform when ever your Wiko Tommy 3 has fallen into the water. The first is to make an attempt to turn the phone back on just after. This can kill the Wiko Tommy 3. Next, it is strongly suggested not to use a heat source to dry the Wiko Tommy 3. Without a doubt, solutions which include oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the phone, do not shake it. Certainly, it could additionally ruin the Wiko Tommy 3.
