Whether in the toilet or in a pool, it from time to time occurs that the Blackview S6 is slipped into the water. Nonetheless, it is not because a mobile phone has fallen into the water that it’s unavoidably dead. In fact, it is feasible to redo an Blackview S6 that has fallen into the water. To do this, it is needed to respect certain actions. People typically have bad reflexes and this is what can deteriorate the Blackview S6. We will first see the steps to be taken after the Blackview S6 has fallen into the water. We will see in the secondary place the common errors that a large number of people make.
Methods to follow in cases where your Blackview S6 fell into the water
In the event that you wish to recover your Blackview S6 in operating order, we highly recommend that you follow the steps below.
Don’t try to turn the Blackview S6 back on after getting out the water
One thing to perform when the Blackview S6 has fallen into the water is to shut off the mobile phone. In fact, in cases where it didn’t turn off, turn it off without doing any other tricks. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Blackview S6 is switched on and wet, you can produce a short circuit and as a result toast the mobile phone.
Remove detachable components
Once the Blackview S6 is out of the water and switched off, it will have to be disassembled to the maximum. This implies that it will be needed to take away the shell, the SIM card, the SD card and the electric battery if possible. Once performed, put all of these things to dry and continue to the following step.
Aspire the water that is in your Blackview S6
Using a straw, you will need to suck up the water that is contained in your Blackview S6. For doing it, you only need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Blackview S6, you will have the ability to start drying it.
Dry the Blackview S6
The fourth step is to dry the mobile phone. For this, we advise you to put it in front of a ventilator several hours. Avoid using méthodes that cause the mobile phone to heat up or damage the mobile phone. Once it is done, we advise you to leave the Blackview S6 in rice for 24 or 48 hours. The rice will as a result absorb the wetness that stays in the Blackview S6.
Reassemble the components and turn on the Blackview S6
When you have completed the prior steps, your Blackview S6 should be dry. So now you can try to turn on the Blackview S6. In the event that this doesn’t do the job, we advise you to hang on a couple of days or to bring the Blackview S6 to a repairman.
What should not be done in cases where the Blackview S6 has fallen into the water
There are several things not to perform when your Blackview S6 has fallen into the water. The first is to try to turn the mobile phone back on just after. This can demolish the Blackview S6. Next, it is highly recommended not to use a heat source to dry the Blackview S6. Certainly, techniques such as oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the mobile phone, do not shake it. Indeed, it could also damage the Blackview S6.
