Whether in the wc or in a pool, it sometimes happens that the HUAWEI MEDIAPAD M3 is slipped in the water. Nonetheless, it is not simply because a cellphone has fallen in the water that it’s undoubtedly dead. In fact, it is feasible to redo an HUAWEI MEDIAPAD M3 that has fallen in the water. To achieve this, it is important to respect certain steps. People frequently have bad reflexes and this is what can degrade the HUAWEI MEDIAPAD M3. We will 1st discover the techniques to be taken after the HUAWEI MEDIAPAD M3 has fallen into the water. We will discover in the secondary place the common errors that most people make.
Steps to follow in cases where your HUAWEI MEDIAPAD M3 fell into the water
If you wish to recover your HUAWEI MEDIAPAD M3 in working order, we advise that you follow the steps listed below.
Do not attempt to turn the HUAWEI MEDIAPAD M3 back on after getting out the water
The very first thing to do when the HUAWEI MEDIAPAD M3 has fallen into the water is to switch off the cellphone. In fact, in cases where it did not switch off, turn it off without doing any other tricks. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the HUAWEI MEDIAPAD M3 is started and wet, you can produce a short circuit and consequently toast the cellphone.
Remove detachable components
Once the HUAWEI MEDIAPAD M3 is out of the water and switched off, it will have to be disassembled to the highest possible. This means that it’ll be important to take out the shell, the SIM card, the SD card and the battery if possible. Once performed, put all of these things to dry and continue to the following step.
Aspire the water that is in your HUAWEI MEDIAPAD M3
Using a straw, you must suck up the water that is contained in your HUAWEI MEDIAPAD M3. For doing it, you only need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your HUAWEI MEDIAPAD M3, you will have the capacity to start drying it.
Dry the HUAWEI MEDIAPAD M3
The fourth step is to dry the cellphone. For this, we advise you to put it in front of a ventilator several hours. Prevent using procédures that cause the cellphone to heat up or damage the cellphone. Once it is finished, we advise you to leave the HUAWEI MEDIAPAD M3 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the HUAWEI MEDIAPAD M3.
Reassemble the components and turn on the HUAWEI MEDIAPAD M3
When you have completed the previous steps, your HUAWEI MEDIAPAD M3 should be dry. So now you can try to turn on the HUAWEI MEDIAPAD M3. If this does not perform, we advise you to hold out a few days or to bring the HUAWEI MEDIAPAD M3 to a repairshop.
What should not be done in cases where the HUAWEI MEDIAPAD M3 has fallen into the water
There are several things not to do when your HUAWEI MEDIAPAD M3 has fallen into the water. The 1st is to try to turn the cellphone back on just after. This can kill the HUAWEI MEDIAPAD M3. Next, it is highly advised not to use a heat source to dry the HUAWEI MEDIAPAD M3. Certainly, solutions such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the cellphone, do not shake it. Indeed, it could additionally ruin the HUAWEI MEDIAPAD M3.
