Whether in the toilet or in a pool, it sometimes happens that the Wiko Lenny 4 is slipped in the water. Even so, it is not simply because a cellphone has fallen in the water that it is obviously dead. In fact, it is feasible to redo an Wiko Lenny 4 that has fallen in the water. To get this done, it is needed to respect specific steps. People often have bad reflexes and this is what can damage the Wiko Lenny 4. We will first of all discover the methods to be taken after the Wiko Lenny 4 has fallen into the water. We will discover in the secondary place the classical errors that the majority of people make.
Methods to follow in cases where your Wiko Lenny 4 fell into the water
Whenever you desire to restore your Wiko Lenny 4 in operating order, we suggest that you follow the steps listed below.
Do not try to turn the Wiko Lenny 4 back on after exiting the water
The first thing to perform when the Wiko Lenny 4 has fallen into the water is to switch off the cellphone. In fact, in cases where it did not switch off, turn it off without doing any other tricks. If it is already off, do not try to turn it back on for the moment. If the Wiko Lenny 4 is switched on and wet, you might produce a short circuit and as a result toast the cellphone.
Remove detachable components
Once the Wiko Lenny 4 is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it will be needed to take away the shell, the SIM card, the SD card and the battery if possible. Once finished, put all of these items to dry and continue to the next step.
Aspire the water that is in your Wiko Lenny 4
Employing a straw, you must suck up the water that is contained in your Wiko Lenny 4. For this, you simply need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Wiko Lenny 4, you will be able to start drying it.
Dry the Wiko Lenny 4
The fourth step is to dry the cellphone. For this, we recommend you to put it in front of a ventilator a number of hours. Prevent using techniques that cause the cellphone to heat up or damage the cellphone. Once it is performed, we recommend you to leave the Wiko Lenny 4 in rice for 24 or 48 hours. The rice will as a result absorb the moisture that stays in the Wiko Lenny 4.
Reassemble the components and turn on the Wiko Lenny 4
When you have completed the prior steps, your Wiko Lenny 4 should be dry. So now you can try to turn on the Wiko Lenny 4. In the event that this doesn’t do the job, we recommend you to wait some days or to bring the Wiko Lenny 4 to a repairman.
What should not be done in cases where the Wiko Lenny 4 has fallen into the water
There are a number of stuff not to perform when ever your Wiko Lenny 4 has fallen into the water. The first of all is to try to turn the cellphone back on just after. This can demolish the Wiko Lenny 4. Next, it is strongly recommended not to use a heat source to dry the Wiko Lenny 4. In fact, methods which include oven or hair dryer heat the components and may damage them. At last, to get the water out of the cellphone, do not shake it. Indeed, it could likewise ruin the Wiko Lenny 4.
