Whether in the toilet or in a pool, it sometimes occurs that the CUBOT Cheetah 2 is slipped in the water. Nevertheless, it isn’t because a telephone has fallen in the water that it’s unavoidably dead. In fact, it is feasible to redo an CUBOT Cheetah 2 that has fallen in the water. To achieve this, it is essential to respect certain actions. People typically have bad reflexes and this is what can deteriorate the CUBOT Cheetah 2. We will first discover the methods to be taken after the CUBOT Cheetah 2 has fallen into the water. We will discover in the second place the classical errors that most people make.
Steps to follow if your CUBOT Cheetah 2 fell into the water
Whenever you want to restore your CUBOT Cheetah 2 in working order, we highly recommend that you follow the steps below.
Do not attempt to turn the CUBOT Cheetah 2 back on after exiting the water
One thing to perform when the CUBOT Cheetah 2 has fallen into the water is to switch off the telephone. In fact, if it did not switch off, turn it off without doing any other manipulation. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the CUBOT Cheetah 2 is turned on and wet, you may create a short circuit and therefore toast the telephone.
Remove detachable components
Once the CUBOT Cheetah 2 is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it will be essential to take out the shell, the SIM card, the SD card and the battery if possible. Once finished, put all of these things to dry and continue to the next step.
Aspire the water that is in your CUBOT Cheetah 2
Utilizing a straw, you must suck up the water that is contained in your CUBOT Cheetah 2. For doing it, you merely have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your CUBOT Cheetah 2, you will be able to start drying it.
Dry the CUBOT Cheetah 2
The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator a number of hours. Prevent using procédures that cause the telephone to heat up or damage the telephone. Once it is done, we advise you to leave the CUBOT Cheetah 2 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the CUBOT Cheetah 2.
Reassemble the components and turn on the CUBOT Cheetah 2
When you have completed the prior steps, your CUBOT Cheetah 2 should be dry. So now you can make an attempt to turn on the CUBOT Cheetah 2. If this does not function, we advise you to hold out a couple of days or to bring the CUBOT Cheetah 2 to a repairshop.
What should not be done if the CUBOT Cheetah 2 has fallen into the water
You will find a number of things not to perform when ever your CUBOT Cheetah 2 has fallen into the water. The first is to make an attempt to turn the telephone back on just after. This can demolish the CUBOT Cheetah 2. Next, it is strongly advised not to use a heat source to dry the CUBOT Cheetah 2. Indeed, techniques such as oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the telephone, do not shake it. Certainly, it could likewise damage the CUBOT Cheetah 2.
