Whether in the wc or in a swimming pool, it occasionally happens that the Acer Liquid Z330 is dropped into the water. On the other hand, it is not because a cellphone has fallen into the water that it’s obviously dead. Certainly, it is feasible to redo an Acer Liquid Z330 that has fallen into the water. To accomplish this, it is important to respect specific actions. People generally have bad reflexes and this is what can degrade the Acer Liquid Z330. We will first of all see the techniques to be taken after the Acer Liquid Z330 has fallen into the water. We will see in the second place the classical mistakes that many people make.
Steps to follow in the event that your Acer Liquid Z330 fell into the water
If you wish to recover your Acer Liquid Z330 in working order, we recommend that you follow the steps listed below.
Don’t attempt to turn the Acer Liquid Z330 back on after exiting the water
The first thing to do when the Acer Liquid Z330 has fallen into the water is to turn off the cellphone. Certainly, in the event that it didn’t switch off, turn it off without doing any other tricks. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Acer Liquid Z330 is started and wet, you may make a short circuit and as a result toast the cellphone.
Remove detachable components
When the Acer Liquid Z330 is out of the water and switched off, it will have to be disassembled to the maximum. This implies that it will be important to remove the shell, the SIM card, the SD card and the battery if possible. When carried out, put all of these things to dry and continue to the next step.
Aspire the water that is in your Acer Liquid Z330
Employing a straw, you need to suck up the water that is contained in your Acer Liquid Z330. For this, you only need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Acer Liquid Z330, you will be able to start drying it.
Dry the Acer Liquid Z330
The fourth step is to dry the cellphone. For this, we advise you to put it in front of a ventilator several hours. Prevent using solutions that cause the cellphone to heat up or damage the cellphone. When it is performed, we advise you to leave the Acer Liquid Z330 in rice for 24 or 48 hours. The rice will as a result absorb the wetness that stays in the Acer Liquid Z330.
Reassemble the components and turn on the Acer Liquid Z330
When you have completed the prior steps, your Acer Liquid Z330 should be dry. So now you can try to turn on the Acer Liquid Z330. If this does not work, we advise you to hold out a couple of days or to bring the Acer Liquid Z330 to a repairshop.
What should not be done in the event that the Acer Liquid Z330 has fallen into the water
You will find several things not to do when ever your Acer Liquid Z330 has fallen into the water. The first of all is to try to turn the cellphone back on just after. This can demolish the Acer Liquid Z330. Following, it is strongly suggested not to use a heat source to dry the Acer Liquid Z330. In fact, solutions which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the cellphone, do not shake it. In fact, it could likewise damage the Acer Liquid Z330.
