Whether in the toilet or in a swimming pool, it occasionally happens that the Acer Liquid Z500 is dropped in the water. On the other hand, it’s not because a telephone has fallen in the water that it is inevitably dead. In fact, it is feasible to redo an Acer Liquid Z500 that has fallen in the water. To get this done, it is important to respect specific steps. People frequently have bad reflexes and this is what can degrade the Acer Liquid Z500. We will 1st discover the methods to be taken after the Acer Liquid Z500 has fallen into the water. We will discover in the secondary place the common errors that many people make.
Steps to follow in the event that your Acer Liquid Z500 fell into the water
If you need to restore your Acer Liquid Z500 in operating order, we suggest that you follow the steps below.
Do not attempt to turn the Acer Liquid Z500 back on after getting out the water
The very first thing to perform when the Acer Liquid Z500 has fallen into the water is to shut off the telephone. In fact, in the event that it did not turn off, turn it off without doing any other tricks. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the Acer Liquid Z500 is started and wet, you might produce a short circuit and therefore toast the telephone.
Remove detachable components
Once the Acer Liquid Z500 is out of the water and turned off, it will have to be disassembled to the maximum. This means that it will be important to remove the shell, the SIM card, the SD card and the electric battery if possible. Once done, put all of these things to dry and proceed to the next step.
Aspire the water that is in your Acer Liquid Z500
Utilizing a straw, you have got to suck up the water that is contained in your Acer Liquid Z500. For this, you only have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Acer Liquid Z500, you will be ready to start drying it.
Dry the Acer Liquid Z500
The fourth step is to dry the telephone. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using méthodes that cause the telephone to heat up or damage the telephone. Once it is completed, we suggest you to leave the Acer Liquid Z500 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the Acer Liquid Z500.
Reassemble the components and turn on the Acer Liquid Z500
When you have completed the previous steps, your Acer Liquid Z500 should be dry. So now you can try to turn on the Acer Liquid Z500. In the event that this does not work, we suggest you to wait a few days or to bring the Acer Liquid Z500 to a repairshop.
What should not be done in the event that the Acer Liquid Z500 has fallen into the water
There are a number of points not to perform when ever your Acer Liquid Z500 has fallen into the water. The 1st is to try to turn the telephone back on just after. This can demolish the Acer Liquid Z500. Next, it is strongly advised not to use a heat source to dry the Acer Liquid Z500. Indeed, solutions such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the telephone, do not shake it. In fact, it could likewise ruin the Acer Liquid Z500.
