It may happen that we need to utilise his Wiko UPULSE and the screen doesn’t turn on anymore. Once this happens, it is extremely frustrating because without a screen, the Wiko UPULSE is unusable. Thus that’s the sort of trouble that needs to be resolved pretty quickly. But do not worry, the fact that the Wiko UPULSE screen doesn’t function, doesn’t necessarily imply that you have to replace it. To help you and to fix your screen, we decided to write this content. We will initially see what you need to control if the screen of your Wiko UPULSE doesn’t function anymore. We will see secondly what can be the causes of this trouble.
What to do in the event that your Wiko UPULSE screen wont switch on
Here below are the steps we advise you to do to repair the screen of your Wiko UPULSE.
Make sure your Wiko UPULSE is fully charged
Yes, we know it’s stupid, nevertheless it quite often happens that this is the source of the trouble. We recommend you to test that your Wiko UPULSE is well loaded. Indeed, it sometimes happens that a cellphone is discharged at once, without being seen coming. Thus, even if you’re sure your Wiko UPULSE was loaded before the screen goes off, you will need to set it on & nbsp; load. If the screen still doesn’t function, go to the next step.
Make a forced restart of the Wiko UPULSE
Sometimes it takes a forced start to your Wiko UPULSE for the screen to function. When you want to do a forced restart, you have to do 1 of the following two maneuvers:
- Staying long on the Power button .
- Hold down the Power button and the Volume Down button for 7 secs.
Once it can be done, your Wiko UPULSE will restart. You are going to have the ability to see in the event that the screen starts walking again or not. If it is not, go to the next section.
Make sure the Wiko UPULSE screen doesn’t turn on
It truly is essential to find out if it is the Wiko UPULSE screen that doesn’t work anymore. Indeed, it is as well likely that the issue comes on the other hand. To be able to verify in the event that the screen is dysfunctional, we invite you to restart your Wiko UPULSE. Once it starts, you should feel a vibration, hear a noise or the led Wiko UPULSE should come on. In the event you notice 1 of these three circumstances, it proves that the Wiko UPULSE is started and that the screen doesn’t function. In the event you do not see any of these situations, it means that the trouble doesn’t necessarily be caused by the screen.
Change the Wiko UPULSE screen
If perhaps the prior step allowed you to confirm that it is the Wiko UPULSE screen that doesn’t work, it means that it is a hardware trouble. In this case, it will unfortunately be crucial to modify the Wiko UPULSE screen. For this, we advise you to go to a specialized shop.
What may induce a screen that doesn’t switch on a Wiko UPULSE
There can be a multitude of causes that will induce a screen that no longer lights up. Here below are diverse possibilities.
Wiko UPULSE took water or moisture?
It quite often happens that this is the induce of a screen that works badly. If perhaps the Wiko UPULSE took the water or in the event you found yourself in a very wet environment recently, the problem is coming from there. If so, you can try warming your Wiko UPULSE with a dryer and pressing hard on the top of the screen. This can sometimes repair the screen.
Has the Wiko UPULSE fallen?
If perhaps your Wiko UPULSE has fallen recently, or in the event that the screen is cracked, it is likely that the trouble comes from there. We recommend you to go to the retail store to replace the screen.
Have there been other signs
If perhaps your Wiko UPULSE has been performing weird stuff lately, this may have been a sign of a trouble with the OS. Indeed, if your Wiko UPULSE goes off by itself, whether it restarts alone or other odd stuff, it’s that there is small trouble with the OS. In this case, we recommend you to make a Factory Reset.
