It may happen that we want to utilise his Tecno Spark Power and the screen doesn’t turn on anymore. When this happens, it is extremely bothersome because without a screen, the Tecno Spark Power is unusable. So that’s the sort of problem that needs to be resolved relatively quickly. But do not be anxious, the fact that the Tecno Spark Power screen doesn’t function, doesn’t necessarily mean that you have to replace it. To help you and to fix your screen, we decided to draft this post. We will first of all see what you need to control if the screen of your Tecno Spark Power doesn’t function anymore. We will see in a second time what can be the causes of this problem.
What to do whenever your Tecno Spark Power screen wont switch on
Here below are the steps we advise you to do to fix the screen of your Tecno Spark Power.
Make sure your Tecno Spark Power is fully charged
Yes, we know it’s stupid, but it generally occurs that this is the source of the problem. We recommend you to test that your Tecno Spark Power is well loaded. Actually, it oftentimes occurs that a mobile phone is discharged at when, without being seen coming. So, also if you’re sure your Tecno Spark Power was loaded before the screen goes off, you have to set it on & nbsp; load. If the screen still doesn’t function, go to the next step.
Make a forced restart of the Tecno Spark Power
Sometimes it takes a forced start to your Tecno Spark Power for the screen to function. When you want to do a forced restart, you need to do 1 of the following two maneuvers:
- Staying long on the Power button .
- Hold down the Power button and the Volume Down button for 7 secs.
Once it can be done, your Tecno Spark Power will restart. You will have the capacity to see whenever the screen starts walking again or not. If it is not, go to the next section.
Make sure the Tecno Spark Power screen doesn’t turn on
It is actually crucial to understand if it is the Tecno Spark Power screen that doesn’t work anymore. Indeed, it is also likely that the issue comes on the other hand. To be able to check whenever the screen is dysfunctional, we invite you to restart your Tecno Spark Power. When it starts, you will have to feel a vibration, hear a noise or the led Tecno Spark Power should come on. In case you notice 1 of these three situations, it proves that the Tecno Spark Power is started and that the screen doesn’t function. In case you do not see any of these situations, it means that the problem doesn’t necessarily be caused by the screen.
Change the Tecno Spark Power screen
If the previous step allowed you to confirm that it is the Tecno Spark Power screen that doesn’t work, it means that it is a hardware problem. In this case, it will unfortunately be important to change the Tecno Spark Power screen. For this, we advise you to go to a specialized shop.
What can cause a screen that doesn’t switch on a Tecno Spark Power
There can be a multitude of causes which could cause a screen that no longer lights up. Here below are diverse possibilities.
Tecno Spark Power took water or moisture?
It generally occurs that this is the cause of a screen that works badly. If the Tecno Spark Power took the water or in case you found yourself in an incredibly wet environment recently, the problem is coming from there. If that is the case, you can try warming your Tecno Spark Power with a dryer and pressing hard on the top of the screen. This can oftentimes repair the screen.
Has the Tecno Spark Power fallen?
If your Tecno Spark Power has fallen recently, or if the screen is cracked, it is likely that the problem comes from there. We recommend you to go to the store to replace the screen.
Have there been other signs
If your Tecno Spark Power has been performing weird stuff lately, this may have been a sign of a problem with the OS. Actually, if your Tecno Spark Power goes off by itself, whether it restarts alone or other odd stuff, it is that there is tiny problem with the OS. In this case, we advise you to make a Factory Reset.
