Sharing the internet connection of ZTE Blade 10 Prime in wifi is a very handy feature on the ZTE Blade 10 Prime. In truth, putting the ZTE Blade 10 Prime in modem mode afford them the ability to share the connection of the telephone with your entourage or with your other devices. So, in the event you do not have a suitable Wifi access where you stand, we will see in the following paragraphs how to convert the ZTE Blade 10 Prime into a wifi hotspot. We will 1st find out how to enable and configure connection sharing. We will find out in a secondary section what is the connection sharing and what it signifies for the ZTE Blade 10 Prime.
Tips on how to share the ZTE Blade 10 Prime connection
To turn your ZTE Blade 10 Prime into a Wi-Fi hotspot, it’s incredibly straightforward. In truth, it is simply necessary to execute 2 steps. The 1st is to enable connection sharing and the secondary is to configure the network. All you should do is follow the 2 steps below.
Enable Internet Connection Sharing on ZTE Blade 10 Prime
To share your ZTE Blade 10 Prime net connection, you’ll 1st need to enable connection sharing. To do this, go to the ZTE Blade 10 Prime Settings menu . When you’re there, you must go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have 3 options available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when ever the ZTE Blade 10 Prime is connected to a computer
- Share via cellphone bluetooth
If you have made your choice, you just have to check to activate the sharing of the ZTE Blade 10 Prime connection. When it is active, you should find out a tiny icon show up in the notifications bar.
Set up Wifi connection sharing on ZTE Blade 10 Prime
At this point that you’ve set your ZTE Blade 10 Prime in modem mode, you’ll need to set up the network so other devices can connect. Simply those who have chosen Wi-Fi sharing are affected by the setup. To configure, click Via Wifi under Internet Connection Sharing. If you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you can change the password to connect to the ZTE Blade 10 Prime network. So, enter the password which you have chosen and validate. Finally, you can also change the network name in the event you wish.
Connect to the ZTE Blade 10 Prime network
At this point that the network is configured, you can connect to it with other devices. To do this, you simply need to bring your system and look for the ZTE Blade 10 Prime network among the available WIFI networks. If you have found it, you can log in using the password that you designed. And there you have a great net connection!
What is Connection Sharing on a ZTE Blade 10 Prime
To make it basic, sharing a connection means sharing the 3G or 4G connection of the ZTE Blade 10 Prime with other devices. So it’s ideal when ever you will not have a WiFi connection but you have 3G or 4G network on your ZTE Blade 10 Prime. This enables you to have a drinking connection almost everywhere. Warning: Be aware that ZTE Blade 10 Prime’s connection share uses mobile data. It indicates that the internet usage you are using is deducted from your portable plan. So, it’s possible to configure a limit on the consumption of mobile data. So, after a certain limit, the ZTE Blade 10 Prime hotspot wifi turn off.
