Sharing the internet connection of Tecno Spark Go in wifi is an extremely convenient feature on the Tecno Spark Go. Certainly, putting the Tecno Spark Go in modem mode can help you to share the connection of the telephone with your entourage or with your different devices. So, in the event you don’t have a suitable Wifi access where you stand, we will observe in this article how to transform the Tecno Spark Go into a wifi hotspot. We will initially discover how to enable and configure connection sharing. We will discover in a secondary section what is the connection sharing and what it implies for the Tecno Spark Go.
The method to share the Tecno Spark Go connection
To turn your Tecno Spark Go into a Wi-Fi hotspot, it’s extremely straightforward. Certainly, it truly is just required to perform two steps. The first is to enable connection sharing and the secondary is to configure the network. All you must do is follow the two steps below.
Enable Net Connection Sharing on Tecno Spark Go
To share your Tecno Spark Go net connection, you’ll 1st need to enable connection sharing. To accomplish this, go to the Tecno Spark Go Settings menu . Once you’re there, you need to go to Wireless and Networks , and after that find the Internet Connection Sharing tab. You will then have three choices available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when the Tecno Spark Go is connected to a laptop
- Share via phone bluetooth
When you have made your choice, you just have to test to activate the sharing of the Tecno Spark Go connection. When ever it is active, you should discover a small icon appear in the notifications bar.
Configure Wifi connection sharing on Tecno Spark Go
At this point that you have set your Tecno Spark Go in modem mode, you’ll need to set up the network so other devices can connect. Only those who have chosen Wi-Fi sharing are affected by the configuration. To configure, click Via Wifi under Internet Connection Sharing. If you are there, go to Configure the Wi-Fi hotspot. Once you are on this page, you’re able to change the password to connect to the Tecno Spark Go network. So, enter the security password of your choice and validate. Finally, you’re able to also modify the network name in the event you wish.
Connect to the Tecno Spark Go network
At this point that the network is configured, you’re able to connect to it with other devices. To accomplish this, you just simply need to bring your device and look for the Tecno Spark Go network among the available WIFI networks. When you have found it, you can sign in using the password that you configured. And there you have a decent net connection!
What is Connection Sharing on a Tecno Spark Go
To make it basic, sharing a connection means sharing the 3G or 4G connection of the Tecno Spark Go with other devices. So it’s ideal when you will not have a WiFi connection but you have 3G or 4G network on your Tecno Spark Go. This allows you to have a good connection almost everywhere. Warning: Remember that Tecno Spark Go’s connection share uses mobile data. It indicates that the internet usage you are using is deducted from your smartphone plan. So, it will be possible to configure a limit on the consumption of mobile data. So, after a certain limit, the Tecno Spark Go hotspot wifi turn off.
