Sharing the internet connection of Tecno Spark Go Plus in wifi is an incredibly handy feature on the Tecno Spark Go Plus. Indeed, putting the Tecno Spark Go Plus in modem mode afford them the ability to share the connection of the mobile phone with your entourage or with your different devices. So, in case you do not have a suitable Wifi access where you are, we will observe in this post the technique to transform the Tecno Spark Go Plus into a wifi hotspot. We will initially see the technique to enable and configure connection sharing. We will see in a second section what is the connection sharing and what it implies for the Tecno Spark Go Plus.
Tips on how to share the Tecno Spark Go Plus connection
To turn your Tecno Spark Go Plus into a Wi-Fi hotspot, it’s very basic. Indeed, it is only required to carry out two steps. The first of all is to enable connection sharing and the second is to set up the network. All you must do is follow the two steps below.
Enable Net Connection Sharing on Tecno Spark Go Plus
To share your Tecno Spark Go Plus net connection, you will 1st have to enable connection sharing. To get this done, go to the Tecno Spark Go Plus Settings menu . Once you’re there, you need to go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have 3 choices available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when the Tecno Spark Go Plus is connected to a laptop
- Share through smartphone bluetooth
If you have made your choice, you just have to test to activate the sharing of the Tecno Spark Go Plus connection. When it is active, you should see a tiny icon show up in the notifications bar.
Set up Wifi connection sharing on Tecno Spark Go Plus
Now that you have set your Tecno Spark Go Plus in modem mode, you’ll have to set up the network so other devices may connect. Simply those who have opted for Wi-Fi sharing are affected by the configuration. To set up, click Through Wifi under Internet Connection Sharing. When you are there, go to Configure the Wi-Fi hotspot. Once you are on this page, you’re able to change the password to connect to the Tecno Spark Go Plus network. So, enter the security password which you have chosen and confirm. Finally, you’re able to also modify the network name in case you wish.
Connect to the Tecno Spark Go Plus network
Now that the network is configured, you’re able to connect to it with other devices. To get this done, you just simply have to bring your device and look for the Tecno Spark Go Plus network among the available WIFI networks. If you have found it, you can sign in using the password that you configured. And there you have a decent net connection!
What is Connection Sharing on a Tecno Spark Go Plus
To make it simple, sharing a connection means sharing the 3G or 4G connection of the Tecno Spark Go Plus with other devices. So it’s ideal when you do not have a WiFi connection but you have 3G or 4G network on your Tecno Spark Go Plus. This permits you to have a drinking connection almost everywhere. Warning: Remember that Tecno Spark Go Plus’s connection share uses mobile data. This means that the internet usage you are using is deducted from your smartphone plan. So, it’s possible to configure a limit on the consumption of mobile data. So, after a certain limit, the Tecno Spark Go Plus hotspot wifi cuts.
