Sharing the net connection of Crosscall Core-M4 in wifi is an extremely handy feature on the Crosscall Core-M4. Indeed, putting the Crosscall Core-M4 in modem mode afford them the ability to share the connection of the cellphone with your entourage or with your different devices. So, if you do not have a suitable Wifi access where you stand, we will see on this page the method to convert the Crosscall Core-M4 into a wifi hotspot. We will 1st see the method to turn on and configure connection sharing. We will see in a second section what is the connection sharing and what it implies for the Crosscall Core-M4.
Tips on how to share the Crosscall Core-M4 connection
To turn your Crosscall Core-M4 into a Wi-Fi hotspot, it’s extremely straightforward. Indeed, it’s just required to perform 2 steps. The initially is to enable connection sharing and the second is to configure the network. All you have to do is stick to the 2 steps below.
Enable Net Connection Sharing on Crosscall Core-M4
To share your Crosscall Core-M4 net connection, you’ll first have to enable connection sharing. To achieve this, go to the Crosscall Core-M4 Settings menu . When you’re there, you must go to Wireless and Networks , and after that find the Internet Connection Sharing tab. You will then have 3 options available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when the Crosscall Core-M4 is connected to a computer
- Share through mobile phone bluetooth
When you have made your decision, you just have to check to activate the sharing of the Crosscall Core-M4 connection. When ever it is active, you should see a small icon show up in the notifications bar.
Set up Wifi connection sharing on Crosscall Core-M4
Now that you have set your Crosscall Core-M4 in modem mode, you’ll have to set up the network so other devices may connect. Just those who have opted for Wi-Fi sharing are affected by the setup. To configure, click Via Wifi under Internet Connection Sharing. If you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you can actually change the password to connect to the Crosscall Core-M4 network. So, enter the password of your choice and validate. At last, you can actually also change the network name if you wish.
Connect to the Crosscall Core-M4 network
Now that the network is configured, you can actually connect to it with other devices. To achieve this, you just simply have to bring your device and look for the Crosscall Core-M4 network among the available WIFI networks. When you have found it, you can log in using the password that you designed. And there you have a good net connection!
What is Connection Sharing on a Crosscall Core-M4
To make it basic, sharing a connection means sharing the 3G or 4G connection of the Crosscall Core-M4 with other devices. So it is ideal when you do not have a WiFi connection but you have 3G or 4G network on your Crosscall Core-M4. This allows you to have a good connection almost everywhere. Warning: Note that Crosscall Core-M4’s connection share uses mobile data. It indicates that the net usage you are using is deducted from your mobile plan. Thus, it’s possible to configure a limit on the consumption of mobile data. Thus, after a specific limit, the Crosscall Core-M4 hotspot wifi turn off.
