Opening the Nokia C1 and removing its hull can be a very practical procedure in lots of circumstances. If you need to insert a SIM card or an SD memory card, you may possibly have to turn off the cover and open the Nokia C1. Opening the Nokia C1 is also required when you wish to remove the battery or when you wish to dust off the inside of your phone. We will first of all see how you can find the point that allows to open the hull of Nokia C1. We will find out in a secondary section tips on how to open the hull of Nokia C1.
Finding the opening point of Nokia C1
If you need to open your Nokia C1, the first of all step is to find the opening point of the hull. To do this, we advise you to refer to the operating instructions of your Nokia C1. In case you do not have the user manual of your Nokia C1, you may find it on the net. Most of the time, the procedure of removing the hull is to slide the hull or to unclip it. However, we advise you to be vigilant when doing this step, in order not to damage your Nokia C1. After getting found the opening point of the hull, you will finally be capable to open your Nokia C1.
Open the Nokia C1
Once you know where the Nokia C1 opening point is, you will be able to start opening the rear part of the hull. To do this slide or boot the rear part of the shell according to the model of your Nokia C1. Once it truly is done, half of the hull is removed. This should enable you to access the battery and probably the SIM card of your Nokia C1. If you need to turn off the front part of the hull of the telephone, realize that it truly is a tad bit more complicated. For this, we advise you to go in store or in specific shop.
The precautions to be taken when opening the Nokia C1
You should know that the hull of the Nokia C1 protects the delicate components that are inside the phone. So, in the event you consider to open the Nokia C1, you will need to handle the telephone cautiously. In fact, the elements just like the battery, the printed circuit boards or the SIM card are delicate. Do not allow dust or moisture to get inside the phone. Install in a clean environment to achieve this.
