Inserting the SIM card into your Moto E6 Plus is important if you need to use your cellphone. Indeed, the SIM card permits your Moto E6 Plus to be able to connect to the mobile network and therefore to make phone calls. However, in case you just bought your Moto E6 Plus, it is not always simple to find out ways to set the SIM card. That is why we decided to write this content. We will 1st see how to proceed before inserting the SIM card in the Moto E6 Plus. We will see ways to insert the SIM card. Finally, we will find out what the diverse types of SIM card.
What to do before putting the SIM into your Moto E6 Plus
Before you start inserting the SIM card into your Moto E6 Plus, it is required to test 2 or 3 stuff. 1st of all, we suggest you to switch off the Moto E6 Plus before you set the SIM card. We also advise you to test if the type of SIM card you have corresponds to the model of your phone. Indeed, there are several types of SIM cards and each mobile phone is compatible with a specific type. Refer to the last part of this content for more information. At last, if the location of the SIM card of your Moto E6 Plus is on the side, we advise that you have a pin or a thin and sharp object to open the slot for SIM. If you would like to modify the PIN code of the SIM card, please refer to our guideline to modify the PIN code on Moto E6 Plus.
Ways to insert the SIM card into the Moto E6 Plus
According to the model of your Moto E6 Plus, there are two likely methods for inserting the SIM card. The right procedure should therefore be one of the following.
Process 1: Insert the SIM card by the side of your Moto E6 Plus
To insert the SIM card into your Moto E6 Plus, 1st find the slot that is normally on the side of the phone. It is quite easy to spot it because there is often a small hole next to it. If you have found it, you will have to insert a pointed object into the small hole next to the slot. For instance, you can employ a paper clip to do so. By pushing into the hole, the SIM card rack should come out. You must then remove the rack from the slot. Simply insert the SIM card into this rack and re-insert it into your Moto E6 Plus. That is it!
Process 2: Insert the SIM card from the back of the Moto E6 Plus
If your Moto E6 Plus does not have a slot on the side, this means that the SIM slot is on the back of the phone. The 1st step will be to turn off the cache on the back of the Moto E6 Plus. To do this, you just simply have to unfasten it with your fingertips. Once done, you should find out the location of the SIM card. From time to time the location is under the battery. In this case, you must turn off the battery. All you have to do is insert the SIM card into your Moto E6 Plus. Be careful to put it in the right direction, the gold side of the card need to be down. Reassemble everything and it’s good!
The different types of SIM cards
There are three diverse types of SIM cards. Indeed, these 3 types differ in accordance to their size. We so find:
- The SIM card: which is of standard size.
- The Micro SIM card: that is smaller than the standard size.
- The Nano SIM card: which is really extremely small. The chip covers almost the entire surface.
If you don’t have the right SIM card for your Moto E6 Plus, you may ask your operator for another one. There are also adapters that may resolve compatibility issues. At last, if you have a standard SIM card, it might be cut to make it into Micro SIM or Nano SIM. At your peril.
