From time to time the screen of ZTE Blade C2 stays black. This situation can appear in several situations. Sometimes it happens after the ZTE Blade C2 falls. Other times, the screen stays black after a start, lock, or sleep. No matter the reason, do not be anxious, you will find several tricks to resolve the black screen of your ZTE Blade C2. For that, it’s going to be recommended to verify several stuff prior to trying the diverse solutions. We will discover at primary what things to examine when the screen of ZTE Blade C2 remains black. We will discover in a second time all the tricks to be able to unlock this awful black screen.
What should you check out when you have a black screen on ZTE Blade C2
Before embarking on the tricks, we recommend you to verify the things below to be able to better understand where the issue can form. This will give you good clues of the nature of the issue.
Is the ZTE Blade C2 LED on when the screen remains black?
One of the first of all stuff to verify is the small led that is on the top of your screen. If the LED is red or blue when the ZTE Blade C2 screen remains black, this means that the mobile is switched on. In such a case, it is extremely probably that the issue comes from the screen.
Is the ZTE Blade C2 charged?
Occasionally, a deep battery discharge prevents the ZTE Blade C2 from turning on for a time. Be sure the ZTE Blade C2 is totally recharged by leaving it connected for at least 1 hour. If perhaps after this the LED doesn’t light up and the screen stays black, the issue can possibly result from the battery.
Is the ZTE Blade C2 damaged?
If the ZTE Blade C2 screen remains black after shock, after dropping , after being wet , or after cracking , the screen can be damaged. In such a case, none of the methods listed below will do the job. You will then have to bring your ZTE Blade C2 to a repairman.
How to proceed when ever the ZTE Blade C2 screen stays black?
After looking at that the issue comes from the screen, you can try the following recommendations to unlock the black screen of your ZTE Blade C2. If a trick doesn’t do the job, look at the next one.
Plug the ZTE Blade C2 into its charger
The first thing to accomplish when the screen of ZTE Blade C2 remains black is to put the cellphone on. This will make it possible to be serene for any subsequent manipulations. This as well resolves the possible issue of a deep discharge of the cellphone battery.
If it is possible, remove the battery from the ZTE Blade C2
If the ZTE Blade C2 is easily removable, we recommend you to remove the battery . This sometimes solves the black screen issue. Wait a few secs, then turn the battery back on and try to start the cellphone. If perhaps the screen is still blocked, look at the next step.
Remove SIM card and SD card
It sometimes happens, without reason, that the SIM card or the SD card conflicts with ZTE Blade C2 and causes a black screen. One of the methods to try is to remove the SIM card and the SD card. Once it’s finished, you must try to start the telephone. If perhaps it works, it indicates there is a conflict with the SIM or SD card.
Force ZTE Blade C2 to reboot
If the screen stays black, the issue often resolves with a forced reboot . To get this done, you must press a number of keys at the same time. You have to remain at least TEN secs for the forced reboot to run. The key combo will depend on the versions but had to be 1 of the subsequent:
- low volume + power button
- low volume + power button + cough Home
- high volume + power button
- volume top + touch power + cough Home
- touch power + cough Home
Wait until the battery is empty
Finally, if perhaps none of the above procédures work, you can try to let your battery discharge. Make certain the battery is totally empty. Once it’s done, plug your ZTE Blade C2 into its charger and try to start the ZTE Blade C2.
