Occasionally the display screen of Wiko Power U10 stays black. This problem can occur in several situations. Sometimes it occurs after the Wiko Power U10 falls. Other times, the screen stays black after a start, lock, or sleep. No matter the reason, don’t be anxious, there are many techniques to resolve the black screen of your Wiko Power U10. For that, it’s going to be necessary to check several things before trying the diverse solutions. We will find out at initially what things to check when the screen of Wiko Power U10 remains black. We will find out in a second time all the tricks to be able to unlock this bad black display screen.
What should you watch if you have a black screen on Wiko Power U10
Before embarking on the techniques, we recommend you to check the points below in order to better understand where the trouble can form. This will provide you good clues of the nature of the trouble.
Is the Wiko Power U10 LED on when the display screen remains black?
One of the 1st things to check is the tiny led that is at the top of your display screen. In the event that the LED is red or blue when the Wiko Power U10 display screen remains black, it signifies that the mobile phone is started. In cases like this, it is highly probably that the trouble comes from the display screen.
Is the Wiko Power U10 charged?
Sometimes, a deep battery discharge prevents the Wiko Power U10 from turning on for some time. Ensure that the Wiko Power U10 is fully recharged by leaving it connected for at least 1 hour. In the event that after this the LED doesn’t light up and the display screen stays black, the trouble can probably originate from the battery.
Is the Wiko Power U10 damaged?
If the Wiko Power U10 display screen remains black after shock, after dropping , after being wet , or after damage , the screen may perhaps be harmed. In cases like this, not one of the tricks below will perform. You will then have to bring your Wiko Power U10 to a repairshop.
What you can do when ever the Wiko Power U10 screen stays black?
After looking at that the trouble comes from the display screen, you can try the next recommendations to unlock the black display screen of your Wiko Power U10. If a technique doesn’t perform, look at the following one.
Plug the Wiko Power U10 into its charger
One thing to do when the display screen of Wiko Power U10 remains black is to put the cellphone on. This will make it possible to be serene for all subsequent manipulations. This likewise resolves the possible trouble of a deep discharge of the cellphone battery.
If you can, remove the battery from the Wiko Power U10
If the Wiko Power U10 is easily removable, we recommend you to remove the battery . This from time to time solves the black display screen trouble. Wait some secs, then turn the battery back on and make an attempt to start the cellphone. If the display screen is still blocked, look at the following step.
Remove SIM card and SD card
It from time to time occurs, without explanation, that the SIM card or the SD card conflicts with Wiko Power U10 and causes a black display screen. 1 of the tricks to try is to remove the SIM card and the SD card. When it’s performed, you should try to start the cellphone. If it works, it indicates there is a conflict with the SIM or SD card.
Force Wiko Power U10 to restart
If the display screen stays black, the trouble often solves with a forced restart . To get this done, you have got to press several keys simultaneously. You have to stay at least TEN secs for the forced restart to run. The key combo is determined by the models but had to be 1 of the following:
- low volume + power button
- low volume + power button + cough Home
- high volume + power button
- volume top + touch power + cough Home
- touch power + cough Home
Hang on until the battery is empty
At last, if not one of the previously mentioned procédures function, you can try to let your battery discharge. Ensure that the battery is entirely empty. When it is carried out, plug your Wiko Power U10 into its power adaptor and try to start the Wiko Power U10.
