Occasionally the display screen of Tecno Spark Power stays black. This situation may happen in several situations. Sometimes it happens after the Tecno Spark Power falls. Other times, the screen stays black after a start, lock, or sleep. In any case, don’t worry, there are several methods to resolve the black screen of your Tecno Spark Power. For that, it will be needed to examine several points just before trying the diverse techniques. We will see at first what things to verify when the screen of Tecno Spark Power remains black. We will see in a second time all the tricks to unlock this bad black display screen.
What should you check out in case you have a black screen on Tecno Spark Power
Before embarking on the tricks, we advise you to examine the points below in order to better understand where the issue can form. This will give you good indications of the nature of the issue.
Is the Tecno Spark Power LED on when the display screen remains black?
One of the first points to examine is the small led that is on top of your display screen. In cases where the LED is red or blue when the Tecno Spark Power display screen remains black, this means that the mobile is switched on. In cases like this, it is extremely likely that the issue comes from the display screen.
Is the Tecno Spark Power charged?
Sometimes, a deep battery discharge prevents the Tecno Spark Power from turning on for some time. Be sure the Tecno Spark Power is entirely recharged by leaving it connected for at least 1 hour. If after this the LED does not light and the display screen stays black, the issue can probably result from the electric battery.
Is the Tecno Spark Power damaged?
If the Tecno Spark Power display screen remains black after shock, after falling , after being wet , or after breaking , the screen can be damaged. In cases like this, not one of the tips listed below will do the job. You will then have to bring your Tecno Spark Power to a repairman.
What to do when the Tecno Spark Power screen stays black?
After verifying that the issue comes from the display screen, you can try the following recommendations to unlock the black display screen of your Tecno Spark Power. If a technique does not do the job, check out the next one.
Plug the Tecno Spark Power into its charger
The very 1st thing to do when the display screen of Tecno Spark Power remains black is to put the mobile phone on. This makes it feasible to be peaceful for all subsequent manipulations. This additionally resolves the possible issue of a deep discharge of the mobile phone electric battery.
If possible, take out the electric battery from the Tecno Spark Power
If the Tecno Spark Power is easily removable, we advise you to remove the electric battery . This occasionally solves the black display screen issue. Wait a few secs, then turn the battery back on and try to start the mobile phone. If the display screen is still blocked, check out the next step.
Remove SIM card and SD card
It occasionally occurs, without explanation, that the SIM card or the SD card conflicts with Tecno Spark Power and causes a black display screen. 1 of the tips to try is to take out the SIM card and the SD card. Once it’s performed, you should try to start the cellphone. If it works, it implies there is a conflict with the SIM or SD card.
Force Tecno Spark Power to restart
If the display screen stays black, the issue often solves with a forced restart . To achieve this, you need to press several keys simultaneously. You need to remain at least 10 secs for the forced restart to work. The key combination depends on the versions but had to be 1 of the following:
- low volume + power button
- low volume + power button + cough Home
- high volume + power button
- volume top + touch power + cough Home
- touch power + cough Home
Hang on until the electric battery is empty
At last, in cases where not one of the previously mentioned méthodes perform, you can try to let your electric battery discharge. Ensure that the electric battery is totally empty. Once it’s completed, plug your Tecno Spark Power into its power adaptor and try to start the Tecno Spark Power.
