Whether in the wc or in a swimming pool, it occasionally happens that the ZTE Blade A610 is dropped in the water. Even so, it’s not simply because a cellphone has fallen in the water that it’s obviously dead. Certainly, it is possible to redo an ZTE Blade A610 that has fallen in the water. To get this done, it is necessary to respect specific steps. People frequently have bad reflexes and this is what can damage the ZTE Blade A610. We will first discover the methods to be taken after the ZTE Blade A610 has fallen into the water. We will discover in the secondary place the classical mistakes that many people make.
Methods to follow if perhaps your ZTE Blade A610 fell into the water
If you want to restore your ZTE Blade A610 in working order, we suggest that you follow the steps listed below.
Don’t attempt to turn the ZTE Blade A610 back on after exiting the water
The first thing to accomplish when the ZTE Blade A610 has fallen into the water is to shut off the cellphone. Certainly, if perhaps it didn’t switch off, turn it off without doing any other manipulation. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the ZTE Blade A610 is switched on and wet, you might make a short circuit and consequently toast the cellphone.
Remove detachable components
Once the ZTE Blade A610 is out of the water and switched off, it will have to be disassembled to the maximum. This implies that it will probably be necessary to take out the shell, the SIM card, the SD card and the electric battery if possible. Once carried out, put all of these things to dry and proceed to the next step.
Aspire the water that is in your ZTE Blade A610
Using a straw, you have got to suck up the water that is contained in your ZTE Blade A610. For this, you simply need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your ZTE Blade A610, you will have the capacity to start drying it.
Dry the ZTE Blade A610
The fourth step is to dry the cellphone. For this, we advise you to put it in front of a ventilator a number of hours. Avoid using techniques that cause the cellphone to heat up or damage the cellphone. Once it is done, we advise you to leave the ZTE Blade A610 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the ZTE Blade A610.
Reassemble the components and turn on the ZTE Blade A610
When you have completed the prior steps, your ZTE Blade A610 should be dry. So now you can try to turn on the ZTE Blade A610. If this does not function, we advise you to hang on a few days or to bring the ZTE Blade A610 to a repairshop.
What should not be done if perhaps the ZTE Blade A610 has fallen into the water
You will find a number of stuff not to accomplish when ever your ZTE Blade A610 has fallen into the water. The first is to try to turn the cellphone back on just after. This can kill the ZTE Blade A610. Next, it is strongly advised not to use a heat source to dry the ZTE Blade A610. Indeed, solutions which include oven or hair dryer heat the components and may damage them. At last, to get the water out of the cellphone, do not shake it. Indeed, it could also ruin the ZTE Blade A610.
