Whether in the wc or in a pool, it from time to time happens that the ZTE Blade 10 Prime is dropped in the water. Even so, it isn’t simply because a telephone has fallen in the water that it is unavoidably dead. Indeed, it is possible to redo an ZTE Blade 10 Prime that has fallen in the water. To do this, it is important to respect specific actions. People typically have bad reflexes and this is what can damage the ZTE Blade 10 Prime. We will first see the methods to be taken after the ZTE Blade 10 Prime has fallen into the water. We will see in the second place the classical errors that the majority of people make.
Methods to follow if your ZTE Blade 10 Prime fell into the water
If you need to restore your ZTE Blade 10 Prime in working order, we advise that you follow the steps below.
Do not try to turn the ZTE Blade 10 Prime back on after getting out the water
One thing to accomplish when the ZTE Blade 10 Prime has fallen into the water is to turn off the telephone. Indeed, if it didn’t turn off, turn it off without doing any other tricks. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the ZTE Blade 10 Prime is turned on and wet, you can create a short circuit and therefore toast the telephone.
Remove detachable components
When the ZTE Blade 10 Prime is out of the water and switched off, it will have to be disassembled to the highest possible. Meaning that it will probably be important to take away the shell, the SIM card, the SD card and the battery if possible. When finished, put all of these things to dry and proceed to the next step.
Aspire the water that is in your ZTE Blade 10 Prime
Using a straw, you have got to suck up the water that is contained in your ZTE Blade 10 Prime. For doing it, you just have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your ZTE Blade 10 Prime, you will be able to start drying it.
Dry the ZTE Blade 10 Prime
The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator several hours. Avoid using techniques that cause the telephone to heat up or damage the telephone. When it is performed, we advise you to leave the ZTE Blade 10 Prime in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the ZTE Blade 10 Prime.
Reassemble the components and turn on the ZTE Blade 10 Prime
When you have completed the prior steps, your ZTE Blade 10 Prime should be dry. So now you can make an attempt to turn on the ZTE Blade 10 Prime. If perhaps this doesn’t function, we advise you to hold out some days or to bring the ZTE Blade 10 Prime to a repairshop.
What should not be done if the ZTE Blade 10 Prime has fallen into the water
You will find several stuff not to accomplish when your ZTE Blade 10 Prime has fallen into the water. The first is to make an attempt to turn the telephone back on just after. This can demolish the ZTE Blade 10 Prime. Following, it is highly suggested not to use a heat source to dry the ZTE Blade 10 Prime. Indeed, methods such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the telephone, do not shake it. In fact, it could additionally ruin the ZTE Blade 10 Prime.
