Whether in the wc or in a swimming pool, it sometimes occurs that the Wiko VIEW 3 is dropped into the water. However, it’s not because a telephone has fallen into the water that it’s unavoidably dead. In truth, it is possible to redo an Wiko VIEW 3 that has fallen into the water. To get this done, it is needed to respect particular actions. People often have bad reflexes and this is what can degrade the Wiko VIEW 3. We will first see the steps to be taken after the Wiko VIEW 3 has fallen into the water. We will see in the 2nd place the classical errors that a good number of people make.
Steps to follow in the event that your Wiko VIEW 3 fell into the water
If perhaps you desire to restore your Wiko VIEW 3 in operating order, we suggest that you follow the steps listed below.
Do not attempt to turn the Wiko VIEW 3 back on after getting out the water
The very first thing to do when the Wiko VIEW 3 has fallen into the water is to switch off the telephone. In truth, in the event that it did not switch off, turn it off without doing any other tricks. If it is already off, do not attempt to turn it back on for the moment. If the Wiko VIEW 3 is started and wet, you might make a short circuit and as a result toast the telephone.
Remove detachable components
When the Wiko VIEW 3 is out of the water and turned off, it will have to be disassembled to the maximum. This implies that it will be needed to take away the shell, the SIM card, the SD card and the battery if possible. When performed, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Wiko VIEW 3
Utilizing a straw, you will need to suck up the water that is contained in your Wiko VIEW 3. For doing it, you merely need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Wiko VIEW 3, you will be ready to start drying it.
Dry the Wiko VIEW 3
The fourth step is to dry the telephone. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using techniques that cause the telephone to heat up or damage the telephone. When it is performed, we recommend you to leave the Wiko VIEW 3 in rice for 24 or 48 hours. The rice will as a result absorb the moisture that stays in the Wiko VIEW 3.
Reassemble the components and turn on the Wiko VIEW 3
When you have completed the previous steps, your Wiko VIEW 3 should be dry. So now you can try to turn on the Wiko VIEW 3. In the event that this doesn’t function, we recommend you to wait some days or to bring the Wiko VIEW 3 to a repairshop.
What should not be done in the event that the Wiko VIEW 3 has fallen into the water
There are a number of stuff not to do when ever your Wiko VIEW 3 has fallen into the water. The first is to try to turn the telephone back on just after. This can kill the Wiko VIEW 3. Next, it is highly recommended not to use a heat source to dry the Wiko VIEW 3. In fact, techniques which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the telephone, do not shake it. Indeed, it could also ruin the Wiko VIEW 3.
