Whether in the wc or in a pool, it sometimes happens that the Umidigi A3 is dropped in the water. Nonetheless, it isn’t simply because a mobile has fallen in the water that it’s undoubtedly dead. Indeed, it is feasible to redo an Umidigi A3 that has fallen in the water. To accomplish this, it is needed to respect specific steps. People often have bad reflexes and this is what can deteriorate the Umidigi A3. We will first discover the steps to be taken after the Umidigi A3 has fallen into the water. We will discover in the secondary place the classical mistakes that the majority of people make.
Steps to follow in cases where your Umidigi A3 fell into the water
Whenever you want to restore your Umidigi A3 in working order, we recommend that you follow the steps below.
Do not attempt to turn the Umidigi A3 back on after getting out the water
One thing to accomplish when the Umidigi A3 has fallen into the water is to turn off the mobile. Indeed, in cases where it did not turn off, turn it off without doing any other manipulation. If it is already off, do not attempt to turn it back on for the moment. If the Umidigi A3 is started and wet, you might generate a short circuit and consequently toast the mobile.
Remove detachable components
When the Umidigi A3 is out of the water and switched off, it will have to be disassembled to the highest possible. This means that it will probably be needed to take away the shell, the SIM card, the SD card and the electric battery if possible. When carried out, put all of these things to dry and continue to the following step.
Aspire the water that is in your Umidigi A3
Employing a straw, you need to suck up the water that is contained in your Umidigi A3. For this, you merely have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Umidigi A3, you will be able to start drying it.
Dry the Umidigi A3
The fourth step is to dry the mobile. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using techniques that cause the mobile to heat up or damage the mobile. When it is performed, we recommend you to leave the Umidigi A3 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Umidigi A3.
Reassemble the components and turn on the Umidigi A3
When you have completed the prior steps, your Umidigi A3 should be dry. So now you can make an attempt to turn on the Umidigi A3. If perhaps this does not function, we recommend you to hold out some days or to bring the Umidigi A3 to a repairshop.
What should not be done in cases where the Umidigi A3 has fallen into the water
There are a number of things not to accomplish when ever your Umidigi A3 has fallen into the water. The first is to make an attempt to turn the mobile back on just after. This can kill the Umidigi A3. Next, it is highly suggested not to use a heat source to dry the Umidigi A3. Without a doubt, methods such as oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the mobile, do not shake it. Indeed, it could additionally ruin the Umidigi A3.