Whether in the toilet or in a pool, it occasionally happens that the Samsung Galaxy S20 FE is dropped in the water. Nonetheless, it’s not simply because a mobile has fallen in the water that it’s inevitably dead. In truth, it is possible to redo an Samsung Galaxy S20 FE that has fallen in the water. To get this done, it is necessary to respect specific steps. People generally have bad reflexes and this is what can degrade the Samsung Galaxy S20 FE. We will first of all see the steps to be taken after the Samsung Galaxy S20 FE has fallen into the water. We will see in the 2nd place the common errors that most people make.
Steps to follow in cases where your Samsung Galaxy S20 FE fell into the water
If perhaps you desire to recover your Samsung Galaxy S20 FE in working order, we advise that you follow the steps listed below.
Do not try to turn the Samsung Galaxy S20 FE back on after exiting the water
One thing to do when the Samsung Galaxy S20 FE has fallen into the water is to switch off the mobile. In truth, in cases where it did not switch off, turn it off without doing any other tricks. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Samsung Galaxy S20 FE is switched on and wet, you may make a short circuit and as a result toast the mobile.
Remove detachable components
When the Samsung Galaxy S20 FE is out of the water and turned off, it will have to be disassembled to the highest possible. This implies that it will be necessary to remove the shell, the SIM card, the SD card and the battery if possible. When completed, put all of these things to dry and continue to the following step.
Aspire the water that is in your Samsung Galaxy S20 FE
Employing a straw, you need to suck up the water that is contained in your Samsung Galaxy S20 FE. For doing it, you just need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Samsung Galaxy S20 FE, you will be ready to start drying it.
Dry the Samsung Galaxy S20 FE
The fourth step is to dry the mobile. For this, we recommend you to put it in front of a ventilator a number of hours. Prevent using techniques that cause the mobile to heat up or damage the mobile. When it is performed, we recommend you to leave the Samsung Galaxy S20 FE in rice for 24 or 48 hours. The rice will as a result absorb the wetness that remains in the Samsung Galaxy S20 FE.
Reassemble the components and turn on the Samsung Galaxy S20 FE
When you have completed the previous steps, your Samsung Galaxy S20 FE should be dry. So now you can make an attempt to turn on the Samsung Galaxy S20 FE. In the event that this doesn’t function, we recommend you to hold out a few days or to bring the Samsung Galaxy S20 FE to a repairman.
What should not be done in cases where the Samsung Galaxy S20 FE has fallen into the water
You will find a number of stuff not to do when ever your Samsung Galaxy S20 FE has fallen into the water. The first of all is to make an attempt to turn the mobile back on just after. This can demolish the Samsung Galaxy S20 FE. Following, it is highly suggested not to use a heat source to dry the Samsung Galaxy S20 FE. Certainly, techniques such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the mobile, do not shake it. In fact, it could also ruin the Samsung Galaxy S20 FE.
