Whether in the wc or in a pool, it sometimes happens that the Pocophone X3 Pro is dropped in the water. Even so, it isn’t simply because a phone has fallen in the water that it’s obviously dead. Certainly, it is possible to redo an Pocophone X3 Pro that has fallen in the water. To accomplish this, it is needed to respect specific actions. People often have bad reflexes and this is what can damage the Pocophone X3 Pro. We will first of all see the steps to be taken after the Pocophone X3 Pro has fallen into the water. We will see in the 2nd place the common mistakes that a large number of people make.
Methods to follow if perhaps your Pocophone X3 Pro fell into the water
Whenever you desire to restore your Pocophone X3 Pro in working order, we highly recommend that you follow the steps below.
Don’t try to turn the Pocophone X3 Pro back on after exiting the water
One thing to do when the Pocophone X3 Pro has fallen into the water is to switch off the phone. Certainly, if perhaps it did not switch off, turn it off without doing any other tricks. If it is already off, do not try to turn it back on for the moment. If the Pocophone X3 Pro is started and wet, you could generate a short circuit and as a result toast the phone.
Remove detachable components
Once the Pocophone X3 Pro is out of the water and turned off, it will have to be disassembled to the maximum. This means that it’ll be needed to take out the shell, the SIM card, the SD card and the battery if possible. Once finished, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Pocophone X3 Pro
By using a straw, you will need to suck up the water that is contained in your Pocophone X3 Pro. For doing it, you only have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Pocophone X3 Pro, you will have the capacity to start drying it.
Dry the Pocophone X3 Pro
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using techniques that cause the phone to heat up or damage the phone. Once it is completed, we suggest you to leave the Pocophone X3 Pro in rice for 24 or 48 hours. The rice will as a result absorb the moisture that remains in the Pocophone X3 Pro.
Reassemble the components and turn on the Pocophone X3 Pro
When you have completed the prior steps, your Pocophone X3 Pro should be dry. So now you can make an attempt to turn on the Pocophone X3 Pro. In the event that this doesn’t function, we suggest you to wait some days or to bring the Pocophone X3 Pro to a repairshop.
What should not be done if perhaps the Pocophone X3 Pro has fallen into the water
You will find several things not to do when your Pocophone X3 Pro has fallen into the water. The first of all is to make an attempt to turn the phone back on just after. This can demolish the Pocophone X3 Pro. Next, it is strongly recommended not to use a heat source to dry the Pocophone X3 Pro. Certainly, solutions which include oven or hair dryer heat the components and may damage them. Finally, to get the water out of the phone, do not shake it. Certainly, it could additionally ruin the Pocophone X3 Pro.