Whether in the toilet or in a pool, it sometimes happens that the Pocophone F3 is dropped in the water. Even so, it is not because a mobile has fallen in the water that it’s obviously dead. In fact, it is feasible to redo an Pocophone F3 that has fallen in the water. To accomplish this, it is necessary to respect certain actions. People generally have bad reflexes and this is what can deteriorate the Pocophone F3. We will 1st discover the techniques to be taken after the Pocophone F3 has fallen into the water. We will discover in the secondary place the classical mistakes that a good number of people make.
Steps to follow if your Pocophone F3 fell into the water
If you desire to restore your Pocophone F3 in working order, we highly recommend that you follow the steps listed below.
Don’t attempt to turn the Pocophone F3 back on after exiting the water
The very first thing to do when the Pocophone F3 has fallen into the water is to switch off the mobile. In fact, if it did not switch off, turn it off without doing any other manipulation. If it is already off, do not attempt to turn it back on for the moment. If the Pocophone F3 is turned on and wet, you can produce a short circuit and therefore toast the mobile.
Remove detachable components
When the Pocophone F3 is out of the water and turned off, it will have to be disassembled to the maximum. This means that it will probably be necessary to take away the shell, the SIM card, the SD card and the battery if possible. When done, put all of these items to dry and continue to the next step.
Aspire the water that is in your Pocophone F3
Utilizing a straw, you need to suck up the water that is contained in your Pocophone F3. For doing it, you merely need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Pocophone F3, you will have the capacity to start drying it.
Dry the Pocophone F3
The fourth step is to dry the mobile. For this, we advise you to put it in front of a ventilator several hours. Avoid using techniques that cause the mobile to heat up or damage the mobile. When it is done, we advise you to leave the Pocophone F3 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the Pocophone F3.
Reassemble the components and turn on the Pocophone F3
When you have completed the previous steps, your Pocophone F3 should be dry. So now you can make an attempt to turn on the Pocophone F3. If this does not do the job, we advise you to hold out a few days or to bring the Pocophone F3 to a repairman.
What should not be done if the Pocophone F3 has fallen into the water
There are several things not to do when your Pocophone F3 has fallen into the water. The 1st is to make an attempt to turn the mobile back on just after. This can destroy the Pocophone F3. Next, it is highly recommended not to use a heat source to dry the Pocophone F3. In fact, methods which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the mobile, do not shake it. Indeed, it could likewise ruin the Pocophone F3.
