Whether in the wc or in a swimming pool, it sometimes happens that the Panasonic Eluga Ray 810 is dropped in the water. On the other hand, it isn’t because a mobile phone has fallen in the water that it’s inevitably dead. In fact, it is feasible to redo an Panasonic Eluga Ray 810 that has fallen in the water. To do this, it is needed to respect particular actions. People often have bad reflexes and this is what can degrade the Panasonic Eluga Ray 810. We will 1st discover the techniques to be taken after the Panasonic Eluga Ray 810 has fallen into the water. We will discover in the secondary place the common errors that the majority of people make.
Steps to follow in the event that your Panasonic Eluga Ray 810 fell into the water
Whenever you wish to recover your Panasonic Eluga Ray 810 in operating order, we recommend that you follow the steps listed below.
Do not attempt to turn the Panasonic Eluga Ray 810 back on after getting out the water
The first thing to do when the Panasonic Eluga Ray 810 has fallen into the water is to turn off the mobile phone. In fact, in the event that it did not switch off, turn it off without doing any other manipulation. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Panasonic Eluga Ray 810 is started and wet, you could create a short circuit and therefore toast the mobile phone.
Remove detachable components
When the Panasonic Eluga Ray 810 is out of the water and turned off, it will have to be disassembled to the highest possible. This means that it will be needed to take away the shell, the SIM card, the SD card and the battery if possible. When carried out, put all of these things to dry and continue to the following step.
Aspire the water that is in your Panasonic Eluga Ray 810
Using a straw, you must suck up the water that is contained in your Panasonic Eluga Ray 810. For this, you only have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Panasonic Eluga Ray 810, you will have the capacity to start drying it.
Dry the Panasonic Eluga Ray 810
The fourth step is to dry the mobile phone. For this, we suggest you to put it in front of a ventilator several hours. Prevent using méthodes that cause the mobile phone to heat up or damage the mobile phone. When it is finished, we suggest you to leave the Panasonic Eluga Ray 810 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the Panasonic Eluga Ray 810.
Reassemble the components and turn on the Panasonic Eluga Ray 810
When you have completed the previous steps, your Panasonic Eluga Ray 810 should be dry. So now you can try to turn on the Panasonic Eluga Ray 810. If perhaps this does not work, we suggest you to hang on some days or to bring the Panasonic Eluga Ray 810 to a repairshop.
What should not be done in the event that the Panasonic Eluga Ray 810 has fallen into the water
You will find several stuff not to do when ever your Panasonic Eluga Ray 810 has fallen into the water. The 1st is to try to turn the mobile phone back on just after. This can demolish the Panasonic Eluga Ray 810. Following, it is highly recommended not to use a heat source to dry the Panasonic Eluga Ray 810. Certainly, solutions such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the mobile phone, do not shake it. In fact, it could also damage the Panasonic Eluga Ray 810.
