Whether in the toilet or in a swimming pool, it sometimes happens that the OnePlus 3 is slipped in the water. Even so, it’s not simply because a phone has fallen in the water that it is unavoidably dead. In truth, it is possible to redo an OnePlus 3 that has fallen in the water. To do this, it is necessary to respect certain steps. People generally have bad reflexes and this is what can degrade the OnePlus 3. We will first discover the methods to be taken after the OnePlus 3 has fallen into the water. We will discover in the second place the classical mistakes that a good number of people make.
Steps to follow in the event that your OnePlus 3 fell into the water
If perhaps you wish to restore your OnePlus 3 in operating order, we suggest that you follow the steps listed below.
Do not attempt to turn the OnePlus 3 back on after exiting the water
One thing to accomplish when the OnePlus 3 has fallen into the water is to turn off the phone. In truth, in the event that it didn’t switch off, turn it off without doing any other tricks. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the OnePlus 3 is turned on and wet, you may make a short circuit and therefore toast the phone.
Remove detachable components
Once the OnePlus 3 is out of the water and turned off, it will have to be disassembled to the maximum. This means that it’ll be necessary to take away the shell, the SIM card, the SD card and the battery if possible. Once finished, put all of these things to dry and continue to the following step.
Aspire the water that is in your OnePlus 3
By using a straw, you will need to suck up the water that is contained in your OnePlus 3. For this, you only need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your OnePlus 3, you will have the ability to start drying it.
Dry the OnePlus 3
The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using methods that cause the phone to heat up or damage the phone. Once it is performed, we recommend you to leave the OnePlus 3 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the OnePlus 3.
Reassemble the components and turn on the OnePlus 3
When you have completed the previous steps, your OnePlus 3 should be dry. So now you can make an attempt to turn on the OnePlus 3. If this doesn’t do the job, we recommend you to hang on a couple of days or to bring the OnePlus 3 to a repairshop.
What should not be done in the event that the OnePlus 3 has fallen into the water
There are a number of points not to accomplish when your OnePlus 3 has fallen into the water. The first is to make an attempt to turn the phone back on just after. This can kill the OnePlus 3. Following, it is highly suggested not to use a heat source to dry the OnePlus 3. In fact, methods such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the phone, do not shake it. Indeed, it could likewise ruin the OnePlus 3.
