Whether in the toilet or in a swimming pool, it occasionally occurs that the Nubia Red Magic 3S is dropped in the water. Even so, it’s not because a mobile has fallen in the water that it is inevitably dead. Indeed, it is possible to redo an Nubia Red Magic 3S that has fallen in the water. To achieve this, it is needed to respect specific steps. People typically have bad reflexes and this is what can degrade the Nubia Red Magic 3S. We will 1st discover the methods to be taken after the Nubia Red Magic 3S has fallen into the water. We will discover in the 2nd place the classical mistakes that many people make.
Steps to follow if perhaps your Nubia Red Magic 3S fell into the water
If you need to recover your Nubia Red Magic 3S in working order, we suggest that you follow the steps listed below.
Don’t try to turn the Nubia Red Magic 3S back on after exiting the water
The first thing to perform when the Nubia Red Magic 3S has fallen into the water is to switch off the mobile. Indeed, if perhaps it didn’t turn off, turn it off without doing any other tricks. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Nubia Red Magic 3S is switched on and wet, you may make a short circuit and consequently toast the mobile.
Remove detachable components
When the Nubia Red Magic 3S is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it’ll be needed to remove the shell, the SIM card, the SD card and the battery if possible. When done, put all of these items to dry and continue to the following step.
Aspire the water that is in your Nubia Red Magic 3S
Utilizing a straw, you need to suck up the water that is contained in your Nubia Red Magic 3S. For doing it, you only have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Nubia Red Magic 3S, you will have the ability to start drying it.
Dry the Nubia Red Magic 3S
The fourth step is to dry the mobile. For this, we recommend you to put it in front of a ventilator a number of hours. Prevent using techniques that cause the mobile to heat up or damage the mobile. When it is completed, we recommend you to leave the Nubia Red Magic 3S in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the Nubia Red Magic 3S.
Reassemble the components and turn on the Nubia Red Magic 3S
When you have completed the prior steps, your Nubia Red Magic 3S should be dry. So now you can make an attempt to turn on the Nubia Red Magic 3S. If this does not do the job, we recommend you to hold out a few days or to bring the Nubia Red Magic 3S to a repairshop.
What should not be done if perhaps the Nubia Red Magic 3S has fallen into the water
There are a number of stuff not to perform when ever your Nubia Red Magic 3S has fallen into the water. The 1st is to make an attempt to turn the mobile back on just after. This can demolish the Nubia Red Magic 3S. Following, it is strongly advised not to use a heat source to dry the Nubia Red Magic 3S. Certainly, solutions which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the mobile, do not shake it. In fact, it could as well ruin the Nubia Red Magic 3S.
