Whether in the wc or in a swimming pool, it sometimes occurs that the Nokia 10 is slipped into the water. Nonetheless, it is not because a telephone has fallen into the water that it is inevitably dead. In truth, it is feasible to redo an Nokia 10 that has fallen into the water. To achieve this, it is important to respect certain actions. People generally have bad reflexes and this is what can degrade the Nokia 10. We will first of all discover the steps to be taken after the Nokia 10 has fallen into the water. We will discover in the secondary place the common mistakes that a good number of people make.
Methods to follow if your Nokia 10 fell into the water
If you want to recover your Nokia 10 in operating order, we recommend that you follow the steps below.
Do not try to turn the Nokia 10 back on after exiting the water
The first thing to do when the Nokia 10 has fallen into the water is to shut off the telephone. In truth, if it didn’t switch off, turn it off without doing any other tricks. If it is already off, do not try to turn it back on for the moment. If the Nokia 10 is turned on and wet, you can produce a short circuit and as a result toast the telephone.
Remove detachable components
Once the Nokia 10 is out of the water and turned off, it will have to be disassembled to the maximum. This means that it will probably be important to take out the shell, the SIM card, the SD card and the battery if possible. Once completed, put all of these items to dry and continue to the following step.
Aspire the water that is in your Nokia 10
By using a straw, you have got to suck up the water that is contained in your Nokia 10. For this, you just have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Nokia 10, you will be able to start drying it.
Dry the Nokia 10
The fourth step is to dry the telephone. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using techniques that cause the telephone to heat up or damage the telephone. Once it is done, we recommend you to leave the Nokia 10 in rice for 24 or 48 hours. The rice will as a result absorb the wetness that remains in the Nokia 10.
Reassemble the components and turn on the Nokia 10
When you have completed the previous steps, your Nokia 10 should be dry. So now you can try to turn on the Nokia 10. If this doesn’t function, we recommend you to wait a couple of days or to bring the Nokia 10 to a repairshop.
What should not be done if the Nokia 10 has fallen into the water
You will find a number of things not to do when your Nokia 10 has fallen into the water. The first of all is to try to turn the telephone back on just after. This can kill the Nokia 10. Following, it is strongly recommended not to use a heat source to dry the Nokia 10. In fact, methods such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the telephone, do not shake it. Indeed, it could as well ruin the Nokia 10.
