Whether in the toilet or in a swimming pool, it sometimes happens that the Motorola Moto X 2 is slipped in the water. Nevertheless, it’s not because a mobile phone has fallen in the water that it’s obviously dead. Certainly, it is feasible to redo an Motorola Moto X 2 that has fallen in the water. To do this, it is important to respect specific actions. People generally have bad reflexes and this is what can deteriorate the Motorola Moto X 2. We will 1st discover the techniques to be taken after the Motorola Moto X 2 has fallen into the water. We will discover in the secondary place the classical mistakes that the majority of people make.
Steps to follow in cases where your Motorola Moto X 2 fell into the water
If you desire to recover your Motorola Moto X 2 in operating order, we recommend that you follow the steps below.
Do not try to turn the Motorola Moto X 2 back on after getting out the water
The first thing to accomplish when the Motorola Moto X 2 has fallen into the water is to switch off the mobile phone. Certainly, in cases where it did not switch off, turn it off without doing any other tricks. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Motorola Moto X 2 is switched on and wet, you can make a short circuit and therefore toast the mobile phone.
Remove detachable components
When the Motorola Moto X 2 is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it’ll be important to take away the shell, the SIM card, the SD card and the electric battery if possible. When finished, put all of these things to dry and proceed to the next step.
Aspire the water that is in your Motorola Moto X 2
Utilizing a straw, you will need to suck up the water that is contained in your Motorola Moto X 2. For this, you only have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Motorola Moto X 2, you will be able to start drying it.
Dry the Motorola Moto X 2
The fourth step is to dry the mobile phone. For this, we advise you to put it in front of a ventilator several hours. Prevent using methods that cause the mobile phone to heat up or damage the mobile phone. When it is performed, we advise you to leave the Motorola Moto X 2 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the Motorola Moto X 2.
Reassemble the components and turn on the Motorola Moto X 2
When you have completed the prior steps, your Motorola Moto X 2 should be dry. So now you can make an attempt to turn on the Motorola Moto X 2. If this doesn’t function, we advise you to wait a few days or to bring the Motorola Moto X 2 to a repairshop.
What should not be done in cases where the Motorola Moto X 2 has fallen into the water
There are several stuff not to accomplish when your Motorola Moto X 2 has fallen into the water. The 1st is to make an attempt to turn the mobile phone back on just after. This can destroy the Motorola Moto X 2. Following, it is highly recommended not to use a heat source to dry the Motorola Moto X 2. Indeed, solutions which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the mobile phone, do not shake it. In fact, it could as well ruin the Motorola Moto X 2.
